Danbury, CT

Engineer Jobs in Danbury, CT

2 jobs found

Include remote jobs

1mo ago

Quality Engineer - Product

FuelCell Energy Danbury, CT

Danbury, CT

1mo ago Closed

$106k - $117k/yr Full time Engineering ISO 9001 QA/QC

This position is no longer accepting applications (closed Sep 23, 2026).

Job Description

FuelCell Energy is seeking a Quality Engineer focused on product quality for power plant systems and quality during site construction and installation. The role proactively manages supplier quality, process qualification, inspections and audits, nonconformances and corrective actions, and continuous improvement aligned to the Quality Management System (QMS) and ISO-9001.

Role Overview

Own supplier quality and internal and external process qualification activities, including inspection and audit execution. Ensure balance of plant quality for FuelCell Energy Block Systems and verify that incoming materials and services meet established quality levels to support fuel cell project delivery.

Key Responsibilities

Proactively ensure quality across balance of plant aspects for FuelCell Energy Block Systems and maintain incoming quality for purchased materials and services supporting fuel cell projects.
Serve as the Quality interface and provide expertise within the Danbury Headquarters and with engineering groups to ensure product requirements are developed, understood, and met.
Define Supplier Qualification processes, required process capability levels, and process controls to achieve Cost of Quality goals.
Collaborate with suppliers to develop and approve Inspection and Test Plans (ITPs) for equipment, components, engineered systems, and contract manufactured skid systems.
Verify supplier data, inspection and NDE reports, FAT reports, and completion of Mechanical and Electrical system inspections, checkouts, and tests. Conduct walk downs to confirm quality requirements from ITPs are satisfied.
Perform inspections for installation and electrical execution, including wiring, termination, insulation testing, high potential cable testing, cold loop checking, earth continuity resistance testing, low ohm testing for bus bars, leak testing, and pre-commissioning activities.
Drive Supplier Quality through supplier surveys, on-site audits, and follow-up audits to assess quality and manufacturing capabilities. Support supplier qualification, surveillance, and supplier development programs.
Support site construction and product installation quality by conducting proactive QA/QC inspections that align with project procedures, standards, specifications, and approvals.
Participate in the Design and Product Development Process by connecting product Critical to Quality (CTQ) requirements to process requirements and ensuring execution of related Verification and Validation plans.
Qualify, control, monitor, and continuously improve internal and supplier processes using Lean Six Sigma tools.
Execute Nonconformance Report activities and assist with Corrective Action entries in the ERP system to address supplier-related issues.
Lead and participate in investigations, root cause analyses, and corrective and preventive action solutions using Lean Six Sigma tools within an 8D framework.
Support continuous improvement of FCE QMS processes and related documentation.
Develop, execute, and analyze quality-reporting measures. Periodically report to management on quality issues, supplier performance, non-conformances, corrective actions, trends, and losses, including plans for resolution and improvement.
Perform Internal Audits in accordance with ISO-9001 and internal requirements.

Required Qualifications

B.S. degree in Mechanical, Electrical, Chemical, or another related engineering degree.
5+ years of relevant experience in Quality Engineering.
Six Sigma Green Belt or higher, or demonstrated application of statistical concepts (including Lean Six Sigma tool application and Reliability Engineering).
Demonstrated use of Lean Six Sigma tools for manufacturing and supplier process qualification, control, root cause analysis, corrective action, and continuous improvement (e.g., MSA, DoE, SPC, FMEA, 5 Whys).
Detail-oriented and methodical approach.
Knowledge of inspection methods and techniques.
Experience using standard mechanical, chemical, and electrical measurement instruments and functional gauges.
Ability to read and interpret technical drawings and product requirements.
Strong technical writing and communication skills.
Ability to work effectively as a team member and independently, with cross-functional leadership skills.
Excellent computer skills, specifically Microsoft Office Suite.
Knowledge of ISO9001 standard, quality systems, policies, and procedures preferred.
Experience with ERP and database system use preferred; experience with Microsoft Dynamics 365/ERP Solutions Quality software is a plus.
Hands-on experience operating multimeters and process meters to complete I/O loop checks and troubleshooting is a plus.

Experience Areas

Engineered equipment and skid assembly, ASME B31.3 welding, ASME pressure vessel fabrication, heat exchangers, gas compressors.
Battery and UPS systems, VFDs, power distribution systems, low, medium, and high voltage switchgear and MCCs, motors and motor controls, transformers.
PLC control systems, instrument and controls, electrical wiring checkout.
Structural steel and sheet metal fabrication, welded fabrications, skid manufacturing.

Technologies

Lean Six Sigma and Lean Six Sigma tools: MSA, DoE, SPC, FMEA, 5 Whys
8D framework
ISO-9001 (ISO9001)
ERP system, ERP and database system use
Microsoft Office Suite
Microsoft Dynamics 365; ERP Solutions Quality software
Multimeters and process meters

Compensation

USD 105,500 - 116,750 per year

Location and Work Arrangement

Hybrid remote in Danbury, CT 06810

Travel and Physical Requirements

Domestic and international travel required up to 70%.
Ability to travel between CT locations regularly.
Ability to obtain and maintain a valid passport and travel internationally without restriction is required.
Ability to work physically in manufacturing plants or construction sites while wearing required PPE (e.g., safety gloves, hard hats, safety shoes).
Lifting up to 25 pounds; standing and walking on concrete flooring or uneven installation/construction site surfaces for extended periods.
Periodic bending and reaching; climbing ladders to inspect incoming, installed, or manufactured parts.
Ability to hear or be aware of audible danger alerts.
Ability to remain on feet and move between areas within a supplier shop or construction site.
Computer work for extended periods required; ability to distinguish color.

Benefits

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

View full job page →

3mo ago

Instrumentation Controls and Electrical Engineer

BEDOUKIAN RESEARCH INC Danbury, CT

Danbury, CT

3mo ago Closed

Full time Electrical Engineering AutoCAD Automation

This position is no longer accepting applications (closed Jul 7, 2026).

Job Description

Bedoukian Research Inc relies on instrumentation, controls, and electrical engineering to keep production running smoothly in Danbury, CT. This role blends hands-on oversight of electrical and control systems with documentation, ongoing maintenance, and involvement in the design of new systems, all while collaborating across engineering, maintenance, and operations teams to drive improvements.

Responsibilities

This function, under general supervision, oversees the electrical and control systems for production.
Document and maintain existing systems while participating in the design for new systems.
Interface with all functions as needed and provide input into all decisions requiring Process Instrumentation, Controls or Electrical Engineering expertise – recommending, implementing, training and validating improvements with the engineering, maintenance and operations staff
Ability to review and program PLCs/HMI’s, preferably experienced with Automation Direct platform.
Draw and design electrical schematic plans using computer-assisted engineering and design software.
Based on input from operations, EHS, maintenance, and Project Engineers develop scope, cost and execution schedule for instrumentation and control upgrade projects.
Design, develop and maintain electrical and control systems and procedures necessary to meet specific project requirements.
Identify commercially available instrumentation to meet operational, EHS needs.
Develop specifications, solicit competitive bids, perform bid comparison and recommend final selection.
Lead electrical or process control focused projects through funding, detailed design, commissioning, training and project close out.
Communicate engineering information across teams and departments to facilitate successful completion of large-scale projects.
Ensuring projects meet electrical and construction safety regulations.
Support operational analysis of data through plantwide data historian including data analysis trending and configuration support with IT
Attending meetings, writing reports and giving presentations to managers.
Ensures proper care, safety and maintenance of equipment and supplies.
Complies with all BRI environmental, and safety policies and procedures.
Performs miscellaneous job-related duties as assigned.

Requirements

A Bachelor’s degree in Electrical or Controls Engineering with 3-5 year’s work experience in a related field.
Ability to identify and resolve system malfunctions and operational problems.
Ability to review and program PLCs/HMI’s, Automation Direct platform.
Proficient and driven to generate and maintain documentation.
Knowledge of industrial instrumentation.
Knowledge of CAD and power distribution preferred.
Knowledge of NFPA electrical codes in hazardous areas preferred.
Knowledge of chemical process instrumentation and control preferred.
Capacity to analyze a problem from multiple perspectives and explore creative solutions.
Knowledge of current technological developments/trends in area of expertise.
Ability to read and follow technical instructions and manuals. Ability to write reports containing technical information.

Technologies

Automation Direct platform
PLC
HMI
CAD
plantwide data historian

Benefits

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Paid time off
Relocation assistance
Tuition reimbursement
Vision insurance

We Offer

An Equal Opportunity Employer committed to diversity in the workplace.

Location

Danbury, CT (onsite)

Job Type

Full-time

Work Location

In person

View full job page →

Engineer Jobs in Danbury, CT

Quality Engineer - Product

Instrumentation Controls and Electrical Engineer

Get Engineer Jobs in Danbury, CT alerts