Manufacturing Quality

Manufacturing Quality Engineer Jobs

6 jobs found

Today

Manufacturing Engineer

Weiss-Aug - East Hanover, NJ East Hanover, NJ

East Hanover, NJ

Today

$100k - $125k/yr Full time Design Engineering Engineering Lean Six Sigma

Apply Now

Job Description

The Manufacturing Engineer will support manufacturing operations at Weiss-Aug’s East Hanover, NJ facility. This onsite position focuses on technical execution and continuous improvement activities that strengthen product quality, cost performance, productivity, safety practices, and adherence to applicable industry standards.

Responsibilities

Lead technical projects to simplify work processes, improve tooling, increase throughput, reduce scrap, and support equipment reliability.
Partner with cross-functional teams to investigate and resolve quality concerns using structured improvement methodologies such as 8D, Kaizen, DMAIC, and root cause analysis.
Create, maintain, and update production-related documentation, including Standard Operating Procedures (SOPs).
Work with production supervisors, operators, toolmakers, and maintenance staff to identify production needs and drive technical responses.
Provide direction for designing and troubleshooting automation systems.
Troubleshoot manufacturing challenges, determine root causes, implement corrective actions, and verify effectiveness using empirical data.
Collaborate with cost accountants to identify process improvement opportunities that support improved financial performance.
Design and deploy essential tools, fixtures, or equipment to improve production efficiency, reduce errors, enhance inspections, and support ergonomics.
Develop lean cell layouts and workflows aimed at minimizing waste and improving productivity and ergonomics.
Maintain current professional and technical knowledge through attendance at tradeshows and continuing education workshops.
Participate in the PPAP process, including drawing feasibility reviews, manufacturing reviews, and Failure Modes and Effects Analyses (FMEAs) reviews.

Required Qualifications

BS degree in Mechanical Engineering, Manufacturing/Industrial Engineering, or equivalent.
Strong analytical and problem-solving capabilities with mechanical aptitude.
5-10 years minimum experience in a medium/high volume manufacturing environment.
Working knowledge of Continuous Improvement practices and tools including Six Sigma, 5S, and Lean manufacturing.
Comfort working hands-on with mechanical and electrical components.
Ability to work as a self-starter with limited supervision.
Good written and verbal communication skills.
Capacity to multi-task and set priorities.
Team-oriented approach with the ability to interact effectively across departments.
Strong Windows-based PC skills, including Microsoft Office, Outlook, and Excel.
Familiarity with time studies.

Preferred Qualifications

3D CAD experience in SolidWorks
GD&T experience
Experience with automation design and/or programming
Experience with vision system technology
ERP experience
ISO/QS knowledge
Plastic Injection/Insert Molding and/or Progressive Stamping Experience

Technologies

SolidWorks
8D, Kaizen, DMAIC
PPAP
FMEAs, FMEA
Microsoft Office, Outlook, Excel

Compensation and Location

Location: East Hanover, NJ (onsite, 100% onsite required)

Base pay range: USD 100,000 - 125,000 per year

Relocation assistance is not available for this position. The base salary for this role will be determined on a case-by-case basis and may vary based on job-related knowledge and skills, experience, and internal consistency. If salary requirements exceed the advertised range and you remain interested in Weiss-Aug, apply.

Benefits

Medical, Dental and Vision
401(k) with company match
Holiday, Vacation and Sick Time
Tuition Reimbursement
Health Savings Accounts (HAS)
Flexible Spending Accounts (FSA)
Cigna Wellness Incentive Program
Employee Assistance Program (EAP)
Short Term Disability
Group Life and Accidental Insurance
Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance
Smoking Cessation Program
Pet Insurance

Additional Notes

This position requires being on site at the East Hanover, NJ location.
Weiss-Aug Group is not accepting unsolicited emails from agencies and/or search firm representatives for this job posting.

View full job page →

1d ago

Process Engineer - Electronics Manufacturing

Michael Page Essex, CT

Essex, CT

1d ago

$85k - $100k/yr Full time Electronics Manufacturing Engineering Manufacturing Engineering

Apply Now

Job Description

Drive SMT process performance and manufacturing excellence across automated electronics production lines in Essex, CT.

Responsibilities

Lead SMT process optimization and manufacturing excellence initiatives
Develop, optimize, and sustain SMT manufacturing processes on automated production lines
Support advanced electronics manufacturing operations and continuous improvement efforts
Troubleshoot process, equipment, and quality issues tied to surface mount assembly
Support New Product Introductions (NPI) and process validation activities
Analyze manufacturing data and implement process improvements to increase yield and productivity
Collaborate with Production, Quality, Engineering, and Maintenance to resolve technical challenges
Drive continuous improvement using Lean Manufacturing and root cause analysis methodologies
Develop and maintain process documentation, work instructions, and manufacturing standards
Support stencil design, solder paste optimization, reflow profiling, and component placement processes
Lead corrective and preventive actions for manufacturing defects and process variation
Evaluate and implement new equipment, tooling, and automation technologies

Requirements

Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, or a related technical field
3+ years of experience supporting SMT, PCB assembly, or electronics manufacturing operations
Strong understanding of soldering processes and manufacturing systems, including reflow ovens, AOI, SPI, and SMT equipment
Proven experience troubleshooting manufacturing processes and driving yield improvements
Knowledge of Lean Manufacturing, Six Sigma, SPC, and root cause analysis methodologies
Familiarity with IPC standards and electronics manufacturing best practices
Strong analytical, problem-solving, and communication skills
Ability to work effectively in a fast-paced manufacturing environment

Technologies

SMT
PCB assembly
Soldering processes
Reflow ovens
AOI
SPI
Lean Manufacturing
Six Sigma
SPC
IPC standards
Stencil design
Solder paste optimization
Reflow profiling
Component placement processes
Root cause analysis methodologies

Benefits

Salary: $85,000 to $100,000 per year, depending on experience
Comprehensive Benefits

Location: Essex, CT (onsite)
Employment type: Permanent
Sector: Engineering & Manufacturing
Sub sector: Production, Manufacturing
Industry: Industrial / Manufacturing
Consultant: Sara Pena
Job reference: JN-102026-7138134

View full job page →

4d ago

Senior Supplier Quality Engineer

Advanced Ground Systems Engineering Santa Fe Springs, CA

Santa Fe Springs, CA

4d ago

$105k - $140k/yr Full time Senior AS9100 Engineering

Apply Now

Job Description

Advanced Ground Systems Engineering is hiring an onsite Senior Supplier Quality Engineer to strengthen supplier performance and help ensure purchased components, materials, assemblies, and outsourced processes meet AGSE, customer, quality system, and applicable regulatory requirements. This role combines technical leadership, supplier partnership, and continuous improvement to support reliable delivery from prototype through production.

Location: Santa Fe Springs, CA 90670 (onsite)
Pay: USD 105,000 - 140,000 per year

What you will do

Provide guidance to entry-level and mid-level Quality Engineers through training, development, and mentorship.
Partner with Engineering and Supply Chain/Buysers on supplier selection, qualification, and development.
Ensure suppliers receive clear technical and quality expectations through purchase order flowdown, procurement codes, and ERP system information.
Maintain strong supplier relationships to align on standards, expectations, and improvement goals.
Manage onboarding and surveillance audits, on-site and remote, for compliance to ISO 9001 and AGSE-specific requirements.
Manage source inspections on-site and remote to support compliance with AGSE purchase order flowdown requirements.
Monitor supplier performance using scorecards and key quality metrics and report results internally.
Manage supplier nonconformance (NCMRs), deviation requests, and concession approvals.
Lead and facilitate RCCA activities for supplier issues using common methods such as 8D, 5-Why, and Ishikawa.
Oversee First Article Inspections (FAIs) per AS9102 or AGSE-specific requirements.
Assess and validate special processes requiring additional certifications (for example welding, plating, heat treating), aligned to industry accreditation such as NADCAP and AWS Welding.
Provide supplier quality guidance, including reviews of PPAPs, PFMEAs, and Control Plans.
Support NPD and NPI to ensure supplier readiness from prototype through production.
Participate in internal and external audits involving ISO, customers, and regulatory bodies.
Promote continuous improvement and lean practices within AGSE and its supplier base, including supplier quality improvement initiatives.
Serve as a subject matter expert on supplier quality for strategic supply chain initiatives.

What you bring

Bachelor’s degree in Engineering, Quality, or related technical discipline.
Minimum 10 years in Quality Engineering, preferably in aerospace, manufacturing, or defense.
Minimum 7 years in a Supplier Quality Engineering role.
Minimum 3 years working in a manufacturing environment specializing in complex machined components, 3D CAD modeling, and structural welding.
In-depth knowledge of ISO 9001 and/or AS9100 standards.
Proficiency in FAIRs (AS9102), PPAP, APQP, and SPC.
GD&T fundamentals and ability to interpret engineering drawings.
Working knowledge of inspection tools and technologies including CMMs, PCMMs, Romer/Faro Arms.
Strong analytical, communication, and documentation skills.
Proficiency with ERP/MRP systems.
Willing and able to travel domestically and internationally to supplier sites. Estimated travel up to 40% of working time.
Familiarity with NADCAP and special process audits.
Preferred: CQE, Six Sigma, or ISO Lead Auditor certification.

Systems and standards you will work with

ISO 9001, AS9100, FAIRs (AS9102), PPAP, APQP, SPC, GD&T
CMMs, PCMMs, Romer/Faro Arms
ERP/MRP systems, NADCAP, AWS Welding

Benefits

401(k)
Dental insurance
Health insurance
Vision insurance

Physical requirements and working conditions

Regularly required to sit, walk, and stand; talk or hear in person and by telephone; use hands repetitively to finger, handle, feel, or operate standard office equipment; reach with hands and arms; lift up to 25 pounds.
Specific vision abilities required: close vision, distance vision, and ability to adjust focus.
Typically office or warehouse conditions with quiet to moderate noise.
In certain assignments, may work near moving equipment and be exposed to toxic or caustic chemicals, biological hazards, airborne fumes, outdoor weather conditions, and loud, prolonged noise.

View full job page →

4d ago

Quality Engineer

Cevians San Diego, CA

San Diego, CA

4d ago

Full time Engineering Manufacturing Quality Quality Control

Apply Now

Job Description

Cevians is seeking an experienced Quality Engineer to support manufacturing operations in Rosarito. This is a hands-on quality role with regular onsite presence 2–3 days per week, combining supplier quality, corrective actions, and continuous improvement with daily support to Quality Control and Production.

What you’ll do

Provide daily onsite support to Quality Control and Production by applying specifications and drawing requirements to both purchased and manufactured products.
Partner with suppliers to improve quality and on-time delivery (OTD), including issuing and tracking Supplier Corrective Action Requests (SCARs) through completion.
Support and maintain the corrective action system by investigating internal quality issues and customer complaints, coordinating Corrective Action Requests (CARs), and verifying corrective action effectiveness.
Review nonconformance reports (NCRs) and coordinate Material Review Board (MRB) activities for disposition decisions.
Prepare, review, and assist others with first article inspection reports.
Maintain calibration schedules, equipment records, and controls to support inspection readiness and measurement traceability.
Manage the approved vendor list (AVL) and support the supplier approval process.
Participate in engineering change order (ECO) meetings and support product change implementation and phase-in activities.
Establish inspection and test methods to ensure products meet specifications and customer requirements.
Lead supplier quality, in-process quality, and defect reduction efforts targeting scrap and rework.
Support quality system audits by assisting with documentation and follow-up actions.
Coordinate environmental and EMI testing with internal teams and external laboratories.
Provide onsite quality support at the Rosarito facility 2–3 days per week.

Qualifications

Minimum 10 years of experience in quality engineering or quality control in aerospace, defense, or a similar manufacturing environment; 15+ years preferred.
Technical school diploma, associate degree, or bachelor’s degree in engineering or a related technical field.
Strong knowledge of complex mechanical drawings and specifications, including GD&T, plus mechanical inspection techniques.
Experience investigating quality issues, determining root causes, and completing corrective actions.
Experience with supplier quality, nonconforming material, MRBs, first article inspections, and calibration controls.
Knowledge of military and aerospace lighting qualification testing, including DO-160, MIL-STD-810, and MIL-STD-461.
Experience setting up and operating thermal chambers, altitude chambers, and vibration tables.
Good understanding of AS9100 and ISO 9001 quality standards, including supporting quality audits.
Knowledge of statistical techniques and continuous improvement tools such as PFMEA, DOE, SPC, Six Sigma, and related methods.
Effective written and verbal communication skills; proficiency with Windows and Microsoft Office.
Ability to collaborate with Engineering, Production, Quality, suppliers, and customers.
English and Spanish communication skills; experience working with manufacturing operations in Mexico preferred.
Based in the San Diego area and able to travel to Rosarito 2–3 days per week.

Tools and environment

Technologies: Windows, Microsoft Office

Competence and attitude

Ability to work in a team
Positive and professional attitude
Results oriented with the ability to work under pressure

Additional requirements

Legally authorized to work in the U.S.
Valid passport for travel to Mexico
Global Entry membership is a plus
Commitment to maintaining a safe and inclusive work environment
Willingness to travel: 50% (required)

Location: San Diego, CA 92101 (preferred). Language: Spanish (preferred).

View full job page →

8d ago

Sr Advanced Manufacturing Engineer

Kronos Consulting Minneapolis, MN

Minneapolis, MN

8d ago

$54 - $54/hr Full time Senior Advanced Manufacturing Engineering

Apply Now

Job Description

Sr Advanced Manufacturing Engineer role in Minneapolis, MN, providing hands-on manufacturing support and producibility improvements for Ring Laser Gyroscopes (RLG).

Responsibilities

Support daily production activities for RLGs, with a focus on glass machining
Perform yield and performance data analysis to track process capability and product health trends
Use CAMP, Lean, and Six-Sigma methods to govern engineering standard work practices
Investigate and resolve technical issues; facilitate issue identification and root-cause analysis
Drive improvements to product design and to manufacturing and assembly processes to reduce cost and cycle time
Support factory capacity by contributing to test equipment knowledge and preventative maintenance plans
Contribute to a self-driven workforce culture aligned to RTY, BIQ, COPQ, and other SQDIC goals
Perform testing of products and software
Complete failure analysis and support manufacturing assembly and test activities for returned goods

Requirements

Bachelor’s Degree in a STEM field
5+ years of experience in manufacturing, testing, fabrication, or assembly processes
U.S. Citizen

Technologies / Methods

CAMP
Lean
Six-Sigma
RCCA
FMEA

What We Value

Experience in product, process, manufacturing, or test engineering
Ability to balance day-to-day priorities with strategic projects
Hands-on work ethic with initiative and ownership of responsibilities and actions
Strong collaboration skills and ability to partner effectively with team members
Capability to identify subtle interrelationships and patterns across problems, including process and data correlation of cause and effect across the value stream
Clear, direct communication so information is understood across diverse teams
Knowledge of RCCA, Lean, Six Sigma, and FMEA tools and methodologies

Location: Minneapolis, MN (onsite)

Compensation: USD 54 per hour

View full job page →

10d ago

Senior Manufacturing Engineer

The MOHR Enterprises LLC Columbus, MS

Columbus, MS

10d ago

$120k - $150k/yr Full time Senior Engineering Manufacturing

Apply Now

Job Description

The MOHR Enterprises LLC offers a Senior Manufacturing Engineer role in Columbus, MS (onsite) with a $120,000 to $150,000 per year salary range and a bonus opportunity. If you enjoy owning the manufacturing process end-to-end, this position supports work that spans build-to-print execution, new product introductions, and factory-floor Lean and Kaizen improvements.

You will contribute to the production of aerospace and defense hardware, working from early ramp-up through steady-state operations, with the ability to see tangible outcomes from process and workflow improvements.

Responsibilities

Develop manufacturing processes and create work instructions for build-to-print parts and assemblies.
Lead new product introduction activities and support production ramp-up.
Resolve production issues across machining, welding, metal fabrication, and assembly.
Create and maintain bills of materials and develop facility and assembly-line layouts.
Partner with production and engineering teams to improve quality and workflow.
Drive Lean and Kaizen initiatives to reduce waste and improve efficiency.

Requirements

6+ years of manufacturing engineering experience, including aerospace or defense experience.
Hands-on engineering experience across machining, welding, metal fabrication, and complex assembly.
Experience developing manufacturing processes and clear work instructions.
Experience with new product introduction, production ramp-up, BOMs, and production layouts.
Demonstrated results using Lean or Kaizen to improve manufacturing.
Bachelor’s degree in Engineering preferred, or Associate’s in Engineering Technology with equivalent experience.
Ability to meet applicable export-control access requirements.

Benefits

Bonus opportunity
Pay: From $120,000.00 per year
Work Location: In person

Why this opportunity

Broad technical ownership across multiple manufacturing processes.
Direct involvement from new product introduction through production ramp-up.
Meaningful aerospace and defense hardware with visible results from your work.

View full job page →

Manufacturing Quality Engineer Jobs

Manufacturing Engineer

Process Engineer - Electronics Manufacturing

Senior Supplier Quality Engineer

Quality Engineer

Sr Advanced Manufacturing Engineer

Senior Manufacturing Engineer

Get Manufacturing Quality Engineer Jobs alerts