EngineerJobs.io
← Back to all jobs

Job Description

Build and own embedded software that brings robots, sensors, and cameras into a deterministic, safe clinical system.

Responsibilities

  • Own the foundational layer the rest of the platform runs on.
  • Bring up, test, and debug new PCBs by reading schematics and layouts and using lab tools to separate hardware faults from software faults.
  • Write low-level MCU firmware for bare-metal or RTOS environments.
  • Develop embedded Linux device drivers for embedded Linux platforms and SOMs such as NVIDIA Jetson and AMD Kria.
  • Implement and tune real-time communication protocols across the robot, including CAN/CAN FD, EtherCAT, I2C, SPI, UART, USB, and Ethernet.
  • Integrate synchronized, deterministic data pipelines for cameras (GMSL, MIPI CSI-2), LiDAR, IMUs, encoders, and motor controllers.
  • Build reliability features for field use: watchdogs, safe-stop routines, telemetry logging, and hardware-in-the-loop (HIL) test fixtures.
  • Collaborate with electrical, mechanical, controls, and robotics software teams (including ROS/ROS 2) to manage power, thermal, and bandwidth constraints.
  • Bring a new board to life when it arrives on the bench.
  • Diagnose failures, determine whether issues are hardware or software, and implement fixes.

Requirements

  • 5+ years of professional embedded systems experience, including hardware bring-up and shipped work (not just support).
  • Strong C and C++ for firmware and drivers.
  • Practical Python skills for test automation and scripting.
  • MCU and RTOS experience: ARM Cortex-M, STM32, ESP32, or similar; bare-metal or RTOS (for example FreeRTOS, Zephyr, or ThreadX).
  • Embedded Linux experience including kernel configuration, device trees, U-Boot, and BSPs.
  • Hands-on debugging with oscilloscopes, logic analyzers, protocol analyzers, and JTAG/SWD debuggers.
  • Experience implementing serial and field bus interfaces such as CAN, EtherCAT, I2C, and SPI.
  • Education: B.S., M.S., or Ph.D. in Computer Engineering, Electrical Engineering, Robotics, or a related field.

Technologies

  • C, C++, Python
  • ARM Cortex-M, STM32, ESP32, bare-metal
  • FreeRTOS, Zephyr, ThreadX
  • Embedded Linux, kernel configuration, device trees, U-Boot, BSPs
  • NVIDIA Jetson, AMD Kria
  • CAN, CAN FD, EtherCAT, I2C, SPI, UART, USB, Ethernet
  • GMSL, MIPI CSI-2, LiDARs, IMUs, encoders, motor controllers
  • Watchdogs, safe-stop routines, telemetry logging, hardware-in-the-loop (HIL) test fixtures
  • ROS, ROS 2, TF, sensor topics
  • NVIDIA Isaac Sim, MuJoCo, MoveIt, cuRobo
  • Oscilloscopes, logic analyzers, protocol analyzers
  • JTAG, SWD debuggers
  • PCB tooling: Altium Designer, KiCad

Nice to Have

  • ROS/ROS 2 middleware and robotics data streaming experience (TF, sensor topics).
  • Familiarity with robot simulation and motion planning tools such as NVIDIA Isaac Sim, MuJoCo, MoveIt, or cuRobo.
  • PCB design experience in Altium Designer or KiCad, including confidence suggesting schematic fixes.
  • Knowledge of motor control (PID, encoder feedback) and power electronics.
  • Background deploying mobile robots, drones, or autonomous systems into unstructured, real-world environments.

Application Instructions

  • Apply directly through Indeed, or email [email protected] with examples of your work.
  • Share what you have brought to life (for example: a board you brought up, firmware you are proud of, or a hardware bug you tracked down and solved).
  • If work is under NDA, explain the problem and your approach.
  • Performance matters more than résumé formatting.

Application Question

  • This position is located in Gainesville, FL. Are you living in this area currently or planning to move soon?

Work Location

  • In person in Gainesville, FL 32601.

Similar Jobs