Hardware Electrical Engineering

Hardware Electrical Engineering Jobs

4 jobs found

1d ago

Senior Electrical Engineer

SHINE Technologies LLC Fitchburg, WI

Fitchburg, WI

1d ago

$100k - $135k/yr Full time Electrical Engineering Senior Design

Apply Now

Job Description

SHINE Technologies LLC is hiring a Senior Electrical Engineer to lead end-to-end electrical development for neutron generators, ion implanters, and radiopharmaceutical production equipment.

Responsibilities

Lead electrical design from concept through production release
Support project planning, budgets, and schedules
Develop electrical requirements, architectures, and interface definitions
Design electrical cabinets, power systems, electronics, instrumentation, cables, and harnesses
Develop and release electrical drawings, schematics, BOMs, specifications, and test documentation
Evaluate designs for reliability, safety, EMC, thermal performance, and manufacturability
Lead electrical design reviews and communicate technical decisions, risks, and impacts
Create verification plans and lead testing to confirm designs meet requirements
Perform hands-on prototype development, system integration, and troubleshooting
Coordinate electrical integration with mechanical, controls, software, systems, and test engineering
Support prototype assembly, system startup, commissioning, and installation
Identify opportunities to improve system performance, reliability, manufacturability, serviceability, and cost
Train and mentor engineers, designers, and technicians as needed
Support development and maintenance of department Standard Operating Procedures and engineering best practices

Requirements

BS in Electrical Engineering with 5-10+ years experience
Experience designing complex electrical systems from concept through production
Experience designing electrical cabinets, control panels, schematics, wiring, cables, and harnesses
Working knowledge of electrical calculations and requirements for UL, NEC, and NFPA
Hands-on experience with electrical test equipment, laboratory testing, and troubleshooting
PCB, power electronics, instrumentation, controls, or other specialized systems experience preferred
Experience with design verification, validation, and system testing
Experience selecting electrical components and evaluating engineering tradeoffs
SolidWorks Electrical experience preferred
Strong problem-solving, technical leadership, communication, and teamwork skills

Technologies

SolidWorks Electrical

Benefits

Comprehensive compensation package
Base salary range: $100,000 - $135,000 per year

Working Conditions and Physical Effort

Ability to remain stationary (standing or sitting) for extended periods
Ability to move within facility environments, including accessing testing areas and operating instrumentation
Ability to handle standard equipment and materials weighing up to 50 pounds with or without reasonable accommodation
Work may occasionally occur in controlled radiation areas under supervision and within regulatory exposure limits
Use of personal protective equipment (PPE)
Moderate exposure to unusual elements such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises
Exposure to hazards or physical risks that require following basic safety precautions
Flexible work hours may be available; shift-work schedules may be required, and extended hours may be necessary
Participation in site emergency plan drills

Eligibility / Security Information Access

Eligibility for employment is conditioned on the applicant’s ability to qualify for access to information subject to U.S. conditions. Additionally, eligibility may be conditioned based on meeting Nuclear Regulatory Commission requirements for access to Safeguards Information, which typically requires a pre-employment drug screen, fingerprinting, and criminal background check.

View full job page →

6d ago

Electrical Digital Design Engineer 4

Legion Technical Solutions LLC Tucson, AZ

Tucson, AZ

6d ago

$125k - $140k/yr Full time Electrical Engineering Design Design Engineering

Apply Now

Job Description

Legion Technical Solutions LLC is seeking an experienced Electrical Digital Design Engineer to lead end-to-end development of complex digital electronics for defense and aerospace applications. This onsite role in Tucson, AZ focuses on designing, analyzing, simulating, verifying, testing, and integrating digital electronic modules and circuit card assemblies, from early requirements through production transition.

Responsibilities

Lead the design and development of complex digital electronic circuits, modules, and multi-assembly hardware systems.
Advance hardware designs from initial requirements and architectural concepts through detailed design, verification, integration, and production.
Create digital hardware architectures, including block diagrams, circuit designs, and detailed schematics.
Design sophisticated multilayer PCBs and circuit card assemblies that incorporate processors, FPGAs, memory devices, and high-speed digital interfaces.
Perform circuit analysis, simulation, and design verification to support electrical performance, reliability, and compliance with system requirements.
Coordinate with PCB layout engineers to define and implement critical design constraints.
Conduct component selection and technical trade studies, including engineering evaluations.
Support integration of hardware with FPGA firmware and embedded software.
Develop and execute hardware test plans, perform laboratory checkout, and troubleshoot complex electronic systems.
Collaborate with systems, software, manufacturing, and test engineering teams to transition designs into production.
Provide technical guidance, participate in design reviews, and contribute to continuous improvement in engineering processes and product performance.

Required Qualifications

Minimum 8 years of professional experience developing and designing electronic circuits and multi-assembly electronic systems.
Proven ability to independently take a digital hardware design from requirements or block diagrams through complete development, verification, and integration.
Strong experience across PCB design processes, including schematic capture, circuit analysis, simulation, and design verification.
Demonstrated expertise developing complex multilayer circuit card assemblies and applying electrical and physical design constraints.
Experience designing digital electronic hardware that includes processors, FPGAs, memory, and related interfaces.
Familiarity with FPGA or embedded software development, with experience supporting hardware programs from development through production.
Experience defining and analyzing requirements, developing hardware architectures, selecting components, and performing engineering trade studies.
Hands-on experience with laboratory test equipment, hardware checkout, troubleshooting, and integration.
Strong analytical, problem-solving, technical communication, and cross-functional collaboration skills.

Technologies

FPGA
embedded software
PCIe
Ethernet
I2C
SPI
UART

Preferred Qualifications

Experience designing digital electronics for aerospace, defense, missile, or other high-reliability applications.
Familiarity with high-speed digital interfaces and communication protocols, including PCIe, Ethernet, I2C, SPI, and UART.
Experience with signal integrity, power integrity, and high-speed PCB design considerations.
Proficiency with industry-standard schematic capture, PCB design, and electronic simulation tools.
Experience supporting hardware qualification, production readiness, manufacturing troubleshooting, and design improvements.
Demonstrated technical leadership in complex electronic hardware development programs.

Benefits

Competitive salary
Health insurance
Paid time off
Relocation bonus

Role Details

Location: Tucson, AZ | On-Site
Salary: USD 125,000 - 140,000 per year
Experience: Minimum 8 years

View full job page →

12d ago

Principal Electrical Engineer – Fuel Cell Systems

Plug Power Inc. Slingerlands, NY

Slingerlands, NY

12d ago

$114k - $185k/yr Full time Electrical Engineering Controls Engineering Design

Apply Now

Job Description

The Principal Electrical Engineer – Fuel Cell Systems role at Plug Power Inc. serves as the electrical technical authority for hydrogen fuel cell power systems. The position sets electrical design direction across the full development lifecycle, from concept through production release, and leads execution across power electronics, embedded controls, system architecture, and verification.

Location and Reporting

Location: Slingerlands, NY (onsite)
Reports to: Manager of Electrical Engineering – Fuel Cell Platforms

Salary and Pay

Annual salary: USD 114,000 - 185,250

Key Responsibilities

Architect, design, and validate DC/DC power converters (LLC, phase-shift full bridge, interleaved boost, buck-boost) for fuel cell stack and BOP interfaces; define electrical specifications for voltage and current profiles, efficiency, ripple, and EMI/EMC across operating conditions.
Drive EMI/EMC mitigation from schematic through PCB layout and full system validation; design high-frequency magnetics for efficiency and manufacturability; own protection architecture and SiC/GaN device selection.
Oversee schematic capture and PCB layout review (Altium preferred), component selection, and DFM; lead hardware design reviews (PDR, CDR) and resolve design issues using structured root cause and corrective action.
Lead architecture, design, and validation of embedded control systems on DSP/MCU/FPGA platforms, including definition of hardware-software interface requirements.
Own the top-level electrical architecture for the fuel cell power system, including power distribution, harness design, sensor integration, grounding strategy, and isolation/protection schemes.
Define BOP electrical requirements for pumps, fans, valves, heaters, and auxiliary loads; specify thermal subsystem electrical requirements, partnering with Mechanical and Thermal teams on integrated packaging and thermal management.
Lead compliance and certification activities for UL, CE, NFPA 2, SAE, and applicable ISO hydrogen and fuel cell standards; support regulatory approvals; establish and own electrical FMEA and functional safety analyses.
Define and own the electrical DVP&R; lead DV and PV test execution covering environmental and safety qualification (shock, vibration, thermal cycling, freeze-thaw, cold-start) plus accelerated stress and durability testing to identify failure modes and predict system lifespan.
Lead structured root cause and corrective action processes (8D, DMAIC) to resolve verification failures and field reliability issues; maintain and update DFMEA throughout product development to mitigate risks before production release.
Partner with Supply Chain early in design for component selection and sourcing, including preferred suppliers, lead time, cost targets, and second-source availability; support supplier qualification and technical reviews.
Drive DFM/DFT practices with Operations and Manufacturing Engineering to resolve assembly, test, and yield issues during pilot builds and production launch.
Close the field reliability loop by translating warranty and field failure data into design improvements.
Execute electrical development within Plug Power’s stage-gate process, owning milestones from Concept Freeze through Production Release; lead NPI programs and platform upgrades with TRL and risk tracking.
Represent electrical engineering status and trade-off analysis at cross-functional program reviews, gate reviews, and executive briefings, prioritizing engineering investments to balance performance, cost, and time-to-market.
Mentor junior and mid-level electrical engineers, cultivate engineering excellence, and drive continuous improvement in design and verification processes.
Represent Plug Power professionally in all interactions and perform other duties as assigned.

Required Qualifications

Bachelor’s degree in Electrical Engineering or a closely related field; Master’s degree preferred
10+ years of power electronics development experience in regulated or high-reliability industries (energy, industrial, automotive, or aerospace)
Demonstrated expertise in DC/DC power converter design and validation, including topology selection, magnetics design, thermal analysis, and EMC
Hands-on embedded controls hardware experience on DSP/MCU/FPGA platforms and digital control implementation
Strong system-level electrical architecture experience across power distribution, protection, grounding, harness, and sensor integration; proficiency in PCB ECAD tools (Altium preferred) and circuit simulation tools (SPICE, MATLAB/Simulink, or equivalent)
Experience developing and executing electrical DVP&R, formal DFMEA, DV/PV testing methodologies, and gate review processes
Experience with electrical compliance and certification (UL, CE, ISO, SAE, NFPA 2) and structured product development frameworks (Stage-Gate, DFSS, or equivalent); familiarity with functional safety standards (ISO 26262, IEC 61508), model-based development (MBD), and HIL testing environments
Direct experience with PEM fuel cell systems, hydrogen energy systems, or electrochemical power systems; wide-bandgap (SiC/GaN) power device design and application experience is a strong plus
Experience working with Supply Chain on component sourcing, supplier qualification, DFM, and end-of-line test strategy development to support production launches
Excellent communication skills, including presenting complex electrical trade-offs to cross-functional, executive, and customer audiences; ability to travel up to 10%
Exempt employees are expected to work as many hours as necessary to complete responsibilities, which may require working more than eight hours a day and more than five days or 40 hours per week

Technologies and Tools

LLC, phase-shift full bridge, interleaved boost, buck-boost
Altium, DSP, MCU, FPGA
SiC, GaN
SPICE, MATLAB/Simulink
8D, DMAIC, PDR, CDR
DVP&R, DFMEA
DFSS, Stage-Gate
ISO 26262, IEC 61508
MBD, HIL testing

Benefits

Health, Dental & Vision Insurance eligibility starting from the first day of hire
401(k) with 5% company match
Bonus eligibility
Paid time off including vacation, personal and sick time
Paid Holidays
Wellness Reimbursement Program
Potential to apply for Tuition Reimbursement
Employee Referral program
Employee Assistance Program

Position Overview

Plug Power is seeking a Principal Electrical Engineer to act as the electrical technical authority for hydrogen fuel cell power systems. This role focuses on the intersection of power electronics, embedded controls, system architecture, and structured product development, spanning the full design lifecycle from concept through production release. The position is located onsite in Slingerlands, NY, and reports to the Manager of Electrical Engineering – Fuel Cell Platforms.

View full job page →

13d ago

Sr. Electrical Design Engineer III

Experis Redmond, WA

Redmond, WA

13d ago

$68+/hr Full time Electrical Engineering Senior Board Design

Apply Now

Job Description

Fully onsite Sr. Electrical Design Engineer III role in Redmond, WA, supporting electrical design work to enable fast, reliable broadband connectivity beyond existing networks.

Responsibilities

Own electrical design activities across the full product lifecycle, including board design, component selection, layout review, board bring-up, system test, and root-cause analysis
Design and verify electrical functions spanning spacecraft interface needs, including analog sensor signal conditioning and processing
Develop and validate motor and actuator control, embedded digital electronics, and power regulation and monitoring/control
Improve board-level electrical designs by reviewing and updating electrical schematics and PCB layouts in collaboration with engineers
Conduct hands-on laboratory testing, analyze results, and document design decisions, findings, and test outcomes for cross-functional partners
Coordinate with hardware, software, firmware, mechanical, systems, and integration teams to support design verification, qualification, and issue resolution

Requirements

B.S. in Electrical Engineering, Computer Engineering, or a related field (or equivalent experience)
3+ years of experience in hardware development across multiple phases of the product lifecycle (consumer electronics, power electronics, robotics, aerospace, automotive, communications, or a combination)
Open to experience across any combination of power, analog, or mixed-signal domains
Technical depth in board-level electrical hardware design, including experience with precision analog/sensor electronics, embedded digital systems, high-speed interfaces, motor/actuator control, memory, or power regulation
Experience with PCB design, board bring-up, and debugging using lab equipment, including oscilloscopes and common electrical test instruments
Experience with schematic capture and PCB-layout ECAD tools, including familiarity with complex boards featuring high-speed interconnects, high-reliability electronics, power regulation, or motor/actuator-control electronics

Benefits

Medical and Prescription Drug Plans
Dental Plan
Vision Plan
Health Savings Account
Health Flexible Spending Account
Dependent Care Flexible Spending Account
Supplemental Life Insurance
Short Term and Long Term Disability Insurance
Business Travel Insurance
401(k), Plus Match
Weekly Pay

Location and Compensation

Location: Redmond, WA (onsite)
Salary: USD 68 per hourly

Export Control Requirement

Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

View full job page →

Hardware Electrical Engineering Jobs

Senior Electrical Engineer

Electrical Digital Design Engineer 4

Principal Electrical Engineer – Fuel Cell Systems

Sr. Electrical Design Engineer III

Get Hardware Electrical Engineering Jobs alerts