Additive Manufacturing

Additive Manufacturing Engineer Jobs

3 jobs found

Today

Software Engineer

RPM Innovations Rapid City, SD

Rapid City, SD

Today

Full time .NET Additive Manufacturing Application Support

Apply Now

Job Description

RPM Innovations is hiring a Software Engineer for its corporate facility in Rapid City, South Dakota, with an onsite work arrangement. In this role, you will design, develop, modify, and verify software solutions, including software that interfaces with additive manufacturing hardware.

The position focuses on building reliable software systems that support manufacturing workflows, operator safety, and operational requirements, while also collaborating across disciplines to deliver end-to-end solutions.

Responsibilities

Develop software solutions by studying information needs, conferring with users, studying systems flow, data usage, and work processes, investigating problem areas, and following the software development lifecycle.
Interface with and control additive manufacturing hardware, including components such as lasers, motion controllers, motors, sensors, and drives.
Analyze requirements across line of business, use case, and technical perspectives to build an integrated understanding of the additive manufacturing process.
Create specifications and determine operational feasibility within existing specifications.
Evaluate design feasibility based on time and cost constraints.
Design, develop, and modify software systems to provide predictable outcomes, ensuring designs always account for operator safety.
Write well-designed, testable, efficient code aligned with SOLID principles.
Modify existing software to correct errors, support new hardware, or improve performance.
Develop and carry out software verification plans and quality assurance procedures, including regression tests, code reviews, and design reviews.
Demonstrate solutions meet requirements through documentation, including flowcharts, layouts, and diagrams, along with code comments and annotations and maintainable code.
Perform full lifecycle software development as part of an interdisciplinary team.
Improve operations through systems analysis and recommendations related to policies and procedures.
Coordinate software system installation, integrating software components into a fully functional software system.
Monitor equipment function to ensure specifications are met.
Write operating manuals or communicate effectively with the manual writer.
Obtain and license software by gathering required vendor information, recommending purchases, testing and approving products.
Assist with technical specifications for computer related purchases.
Evaluate and recommend hardware and software solutions to improve security and efficiency of company operations.
Maintain and expand job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment, participating in educational opportunities, reading professional publications, maintaining professional networks, and engaging in professional organizations.
Protect operations by keeping information confidential, recognizing access to industrial and trade secrets and the need to safeguard intellectual property.
Train users to operate new or modified equipment.
Train employees on third-party and internal software applications.
Assist with the design and implementation of information system solutions for tracking employee time, material, accounting, and other information resources.

Requirements

Bachelor’s degree in computer science, software engineering, computer engineering, mathematics, or information science.
Equivalent work experience may be considered if candidates have demonstrated computer programming skills.
Excellent technical and problem-solving skills.
Good communication and teamwork skills; preference given to motivated individuals who demonstrate creativity and a willingness to learn.
Ability to document requirements and specifications.
Proven working experience in software engineering.
Ability to develop software in C#, VB.Net, C++, or other selected languages.
Excellent multi-tasking skills and ability to prioritize concurrent tasks with minimal direction.
Continuous improvement mindset focused on efficiency of support processes, customer satisfaction, and monitoring, management, and optimization tools.
Ability to work on another’s design and support cross-functional development by contributing to the maturation of company processes and procedures.
Must maintain excellent written, verbal, and customer relationship communication skills.
Capacity to work well in groups and willingness to understand the roles of fellow team members.

Technologies

MS Visual Studio
C#
Visual Basic.Net
MS DevOps / Team Foundation Server
MS Windows Server
MS SQL Server
MS SQL Server Express
MS SharePoint
MS Exchange
MS Windows Professional
Microsoft Office
Siemens TIA
Android App Development
ABB Mint Workbench
IPG LaserNet (stand-alone program, C API, and TCP Protocol)

Preferred Qualifications

Familiarity with RTOS and real-time processes.
Prior motion control knowledge.
Familiarity with numerical control programming languages used in computer-aided manufacturing, including G-code and M-code.
Familiarity with additive manufacturing concepts, especially metal-based additive manufacturing.
Familiarity with 5-axis machine systems.
Familiarity with software development methodology and release processes, including agile programming and SOLID principles.
Numerical and analytical skills such as computational geometry used in path planning.
Familiarity with GigE cameras / industrial vision systems.
Familiarity with long-running, multithreaded applications.

Benefits

Health/dental insurance
Simple IRA program
Paid holidays/vacation
Employee assistance program

Additional Information

Mandatory pre-employment drug screen is required.

View full job page →

Today

Engineer II - Materials

General Dynamics Electric Boat Groton, CT

Groton, CT

Today

Full time Additive Manufacturing Advanced Manufacturing Design Engineering

Apply Now

Job Description

General Dynamics Electric Boat is seeking an Engineer II for Materials to support Department 342 from an onsite location in Groton, CT. In this role, you will perform metallic materials engineering that connects design, additive manufacturing, materials evaluation, and technical liaison across EB departments, shipyards, vendors, and the customer.

This position focuses on translating materials engineering inputs into practical outcomes across the full lifecycle of engineering work, including specification interpretation, non-conformance adjudication, and engineering investigations tied to material performance and failure analysis.

Responsibilities

Provide Materials Engineering input into Design and Engineering Additive Manufacturing projects, supporting work from initial concepts through final design, including material selections, materials evaluations, and technical liaison with internal departments and the customer
Support specification selection and interpretation
Provide technical assistance and direction to Operations related to the processing of materials and fabrication of components
Adjudicate material non-conformances such as defects and improper heat treatment
Contribute metallurgical expertise to multi-disciplinary teams
Perform material failure analyses and related engineering investigations
Interpret case reports and studies in a practical and meaningful way
Maintain liaison with Government and private laboratories and industry partners related to materials technology
Provide overall support for all Engineering departments

Requirements

BS in Materials Engineering with a concentration or interest in metallurgy, or BS in Metallurgical Engineering
2-5 years of post graduate engineering experience
MS in Materials Engineering with a concentration or interest in metallurgy, or MS in Metallurgical Engineering
Experience in an industrial environment, shipbuilding, or other heavy fabrication
Experience with Additive Manufacturing processes, including direct-energy deposition and laser powder bed fusion
Familiarity with additive manufacturing processes and metal production practices including mill production of metal products, casting production, heat treatment, mechanical properties, mechanical property testing, and metallographic techniques
Knowledge of material specifications, standards, and technical publications, including Military, Federal, ASTM, and ASM is desirable
Ability to communicate clearly and concisely in writing and verbally, including preparing technical reports and correspondences with correct grammar, spelling, and punctuation
Comfort working in a fast-paced team setting, consulting with coworkers, and interacting with both hourly technicians and upper management
Microsoft Excel, Word, and PowerPoint proficiency is required

Technologies

Additive Manufacturing processes
Direct-energy deposition
Laser powder bed fusion
Mill production of metal products
Casting production
Heat treatment
Mechanical property testing
Metallographic techniques
Military specifications
Federal specifications
ASTM
ASM
Microsoft Excel
Microsoft Word
Microsoft PowerPoint

Work Environment

Inside

View full job page →

26d ago

Cold Spray Product Engineer

Mid-America Aerotech West Fargo, ND

West Fargo, ND

26d ago

$60k - $80k/yr Full time Additive Manufacturing Cold Spray Engineering

Apply Now

Job Description

Mid-America Aerotech (MAA) is looking for a Cold Spray Product Engineer to support cold spray developmental and production operations. This role emphasizes research and development for government programs, internal MAA R&D efforts, and commercial research activities, while partnering closely with engineering and production teams.

The position reports to the Senior Engineer and is responsible for ensuring engineering work follows established standards and meets company requirements across internal and external processes.

Role focus and scope

Support all cold spray developmental and production operations with an emphasis on R&D.
Collaborate extensively with MAA engineering and production staff to move programs forward.
Ensure engineering activities, including internal and external processes, are completed in accordance with established standards and company requirements.

Key responsibilities

Develop, manage, and oversee research and development programs as required by MAA management.
Test additive manufacturing technology, specifically cold spray.
Identify opportunities to improve cold spray technology and expand technical understanding.
Create technical documentation required by MAA processes or directed by customers.
Publish and disseminate findings through conferences, meetings, publishing reports, and advising decision-makers.
Develop and enable execution of new repair procedures using cold spray technologies.
Maintain work records following MAA standard practices and guidance, including the MAA FAA Repair Station Manual.
Support equipment calibration and maintenance requirements.
Program and operate robotic equipment to accomplish tasks.
Prepare cost estimates and analyze cost parameters.
Build prototypes, products, and systems for testing.
Design testing procedures and coordinate to identify problems and solutions.
Collaborate on standards for procedures and component requirements.
Coordinate and communicate work efforts.
Support or lead teams of engineers and technicians.

Requirements

Cold spray or thermal spray experience (plasma spray, HVOF, flame spray, etc.) or additive manufacturing desired.
Familiarity with robot operation and programming desired.
General computer skills, plus engineering-specific applications as required.
Ability to read and interpret technical data, including drawings and technical orders from military and civilian sources.
Effective communication skills, both oral and written.
Effective interpersonal skills.
Knowledge of established aviation maintenance, overhaul, and repair practices.
Bachelor’s degree or higher in an Engineering discipline.

Additional corporate expectations

Provide positive leadership and support a safe work environment.
Support company policies and provide input to company decision-making processes.
Actively support and promote AS 9100 and ISO 9001:2000 programs and practices.
Demonstrate innovation and solution orientation, seek collaboration and continuous learning, and promote improvement.
Accept accountability and provide honest feedback while supporting and coaching subordinates.

Position details

Location: West Fargo, ND (onsite, in person)
Employment type: Full-time
Compensation: USD 60,000 to 80,000 per year
Exempt status: Exempt position under the Fair Labor Standards Act; not subject to DOT 49 CFR Part 40, and FAA 14 CFR Part 120 Drug and Alcohol Policy

Benefits

401(k) and 401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Relocation assistance
Vision insurance

View full job page →

Additive Manufacturing Engineer Jobs

Software Engineer

Engineer II - Materials

Cold Spray Product Engineer

Get Additive Manufacturing Engineer Jobs alerts