Windsor, CT

Engineer Jobs in Windsor, CT

3 jobs found

Include remote jobs

1mo ago

Electrical Engineer - Multi-Site

Accutron, Inc Windsor, CT

Windsor, CT

1mo ago Closed

$80k - $110k/yr Full time Electrical Engineering Electrical Testing Embedded

This position is no longer accepting applications (closed Sep 21, 2026).

Job Description

Accutron, Inc is seeking an Electrical Engineer to support electronics manufacturing and engineering teams across multiple sites. The role is centered on hands-on troubleshooting, testing, and validation of electronic assemblies and PCBs, with additional support for prototypes through production.

This position will support three locations: Milford, CT, Windsor, CT, and Jacksonville, IL, with the work location listed as onsite in Windsor, CT. Salary for this role is USD 80,000 - 110,000 per year, and the position requires 8+ years of relevant experience.

Key Responsibilities

Conduct testing, troubleshooting, and validation of electronic assemblies and PCBs to confirm functionality and reliability.
Work with microcontroller-based systems ranging from 8-bit to 32-bit, including peripherals such as RTC, Timers, ADC, DAC, PWM, Interrupts, DMA, Capture/Compare, and UART.
Program and configure C compilers, work with or without RTOS environments, and interface with communication stacks such as USB, TCP/IP, CAN, and Modbus RTU.
Support design-for-manufacturing activities, including PCB layout review for 2–6 layers, component placement, and considerations for high-current/high-voltage designs.
Operate and maintain engineering pick-and-place equipment, including component loading, adjustment for odd shapes, and verification of placement accuracy.
Perform fine-pitch SMT soldering and rework down to 0402 components using both leaded and lead-free solder.
Assemble, test, and debug prototypes and pre-production units to ensure alignment with engineering requirements.
Develop and build test jigs, simulators, and fixtures, including wiring schematics and panel layouts, with safe use of hand tools.
Operate and interpret results from oscilloscopes, logic analyzers, multimeters, waveform generators, spectrum analyzers, and high-voltage power supplies.
Create and refine Bills of Materials (BOMs) by cross-referencing general components to in-house part numbers, ordering prototypes, and applying appropriate scrap factors.
Maintain accurate, repeatable test data and support root cause analysis for production or field issues.
Install and troubleshoot engineering software, firmware tools, and driver issues as needed for testing or production support.
Perform data collection and feasibility analysis, supporting process or product improvement initiatives.
Collaborate with engineering, production, and quality teams to support builds, testing, and continuous improvement.
Use Outlook, Word, Excel, SolidWorks, CAB, and online databases to locate technical documentation, data sheets, and component specifications.
Perform other related duties as assigned.

Required Qualifications

Legally authorized to work in the U.S. in compliance with ITAR regulations.
8+ years of experience in electronics testing, troubleshooting, or manufacturing support.
Solid understanding of microcontroller architectures, embedded systems, and communication protocols.
Skilled in using test and measurement equipment for signal tracing and circuit validation.
Hands-on experience with SMT soldering, rework, and prototype assembly.
Strong mechanical aptitude and fine motor skills for working with small components and lab tools.
Excellent documentation, organization, and communication skills.
Ability to work both independently and collaboratively in a fast-paced environment.

Tools, Technologies, and Skills

C, C compilers, RTOS
USB, TCP/IP, CAN, Modbus RTU
Outlook, Word, Excel, SolidWorks, CAB
Microcontroller-based systems and peripherals: RTC, Timers, ADC, DAC, PWM, Interrupts, DMA, Capture/Compare, UART
Test and measurement equipment: oscilloscopes, logic analyzers, multimeters, waveform generators, spectrum analyzers, high-voltage power supplies
SMT, pick-and-place equipment, Bills of Materials (BOMs)

Education

Bachelor’s degree in engineering or Electronics Engineering Technology, or a related discipline.

Benefits

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insurance

Work Location: In person

Pay: $80,000.00 - $110,000.00 per year

View full job page →

1mo ago

Controls Engineer

JT Automation Inc. Windsor, CT

Windsor, CT

1mo ago Closed

$90k - $120k/yr Full time Controls

This position is no longer accepting applications (closed Aug 29, 2026).

Job Description

JT Automation Inc. invites applications for a Controls Engineer to design and implement control systems for industrial machinery. The role encompasses hardware selection, schematic development, fabrication of control electronics, and the creation of machine code and user interfaces for PLC and PC based systems. This onsite position is based in Windsor, CT, with a yearly salary range of USD 90,000 to 120,000. The ideal candidate will bring at least five years of relevant experience and hold a bachelor’s degree.

Responsibilities

Collaborates with mechanical and process engineers and with customers to determine control system and machine requirements.
Chooses appropriate controls hardware within constraints of cost, capability, and customer needs.
Produces a complete control system schematic using SolidWorks Electrical.
Develops, tests, and debugs industrial control software across languages such as Ladder Logic, VB.NET, and C#, along with hardware-specific languages like Aero Basic.
Modifies existing software after reviewing new requirements in light of current hardware, electronics, and software.
Designs and develops functional user interfaces using VB.NET, C#, or dedicated UI hardware and software, including Siemens and Allen Bradley platforms.
Documents all code for future review and revision.
Collaborates with engineers and writers to prepare customer-ready documentation of software features.
Interfaces with hardware original equipment manufacturers to integrate their application program interfaces.
Assists mechanical and electrical engineers with control system development issues.
Provides training and support to customers, either one-on-one or in groups.
Assists with the fabrication of control panels and enclosures.
Develops machine vision programs and strategies.
Supports mechanical assembly as needed.
Develops desktop software when off-the-shelf solutions do not exist.
Creates plug-ins and interfaces to enable communication with minimally supported hardware.

Requirements

Proficiency in programming across multiple languages, including VB.NET and Ladder Logic.
Experience with control system development on Siemens PLC platforms.
Ability to design and program effective and ergonomic user interfaces.
Strong communication skills with colleagues, production workers, customers, and vendors.
Highly motivated to adapt to multidisciplinary challenges.
Self-sufficient and capable of working with general supervision.
Bachelor’s degree in software engineering, computer science, controls engineering, robotics engineering, or equivalent.

Technologies

VB.NET
Ladder Logic
C#
Aero Basic
SolidWorks Electrical
Siemens PLC platforms
Allen Bradley platforms
Aerotech-based programming
G code
Siemens 840D
Profibus
ProfiNet
TCP/IP
Serial
EtherCAT

Benefits

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible schedule
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Referral program
Vision insurance

Language Ability

Read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from managers, clients, customers, and the general public.

Math Ability

Apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.
Apply mathematical operations to tasks including frequency distribution, test reliability and validity, and analysis.

Reasoning Ability

Apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
Interpret nonverbal symbolism such as formulas, scientific equations, graphs, and musical notation in complex contexts.
Manage a variety of abstract and concrete variables.

Physical Demands

Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
While performing duties, the employee will regularly sit, use hands, and talk or hear.
Frequently stand, walk, and reach with hands and arms.
Occasionally climb or balance, stoop, kneel, crouch, or crawl.
Occasionally lift and/or move up to 20 pounds.
Specific vision requirements include close vision, ability to adjust focus, and color vision.
Occasionally exposed to non-ionizing laser radiation during duties.

View full job page →

2mo ago

Electrical Engineer IV

TRC Companies, Inc. Windsor, CT

Windsor, CT

2mo ago Closed

$118k - $150k/yr Full time Electrical Engineering Senior AutoCAD

This position is no longer accepting applications (closed Jul 27, 2026).

Job Description

Electrical Engineer IV based onsite in Windsor, CT, leads substation engineering, QA/QC, and technical reviews for US clients, with project leadership in design deliverables.

Responsibilities

Oversee substation engineering and consulting services for clients across the United States.
Produce electrical protection/control and physical layout design deliverables.
Manage projects of varying size, complexity, and voltage class, from small distribution upgrades to large transmission initiatives.
Serve as a Senior Engineer assigned to perform station engineering physical quality reviews.
Be familiar with key elements of the electrical physical system, including conduit plans, direct stroke lightning plans and studies, electrical plans/elevations/details, grounding plans and studies, bill of materials, AC Schematic three-lines, DC schematics, wiring diagrams, interconnections, and cable schedules.
Act as an independent Quality Control Engineer on assigned Station Engineering Physical projects.
Provide industry and client-specific knowledge to project teams.
Offer constructive feedback on physical design packages.
Collaborate with other reviewers at TRC and participate in review meetings to discuss comments and feedback.
Support design teams by answering design questions as needed.
Apply sound engineering judgment to select and apply standard techniques for systems of varying size and complexity under supervision.
Conduct preliminary and detailed design reviews; review equipment specifications and engineering calculations for safety and performance.
Apply appropriate engineering subject matters and cross-discipline interfaces to ensure constructability and conformance to project requirements.

Requirements

Experience leading Station Engineering Physical design projects.
Knowledge of Station Engineering Physical project schedules and timelines.
Proficient in applying standards (for example ANSI/IEEE, National Electric Safety Code, ASTM, AIC, etc.).
Commitment to complete and accurate record keeping; responsible for the quality of all work performed.
Ability to provide feedback that fosters learning and growth in others.
Keep informed of current developments in the area of responsibility.
May assist in professional development, training, and evaluation of department personnel.
Minimum eight (8) years of relevant engineering experience.
Bachelor of Science in Engineering from an accredited program.
Professional Engineering License is preferred.
Excellent verbal and written communication skills; solid technical and problem-solving abilities.
Ability to collaborate with design engineers and cross-discipline teams.
Self-motivated and detail-oriented.
Proficient in Microsoft Office (Excel, Word, PowerPoint).
Experience with engineering software applications such as Bluebeam Revu, AutoCAD, and MicroStation.

Technologies

Bluebeam Revu
AutoCAD
MicroStation
Microsoft Office

Benefits

Medical, dental, vision, and disability insurance.
401k package with traditional and Roth IRA options and company match.
Paid time off ranging from 15 to 25 days per year, based on status and seniority.
Minimum of 8 paid holidays per year for full-time employees.
Paid sick, family, and disability leave in accordance with state laws for all employees, including part-time, subject to eligibility.
Jurisdiction-specific benefit packages for international and Puerto Rico employees.

View full job page →

Engineer Jobs in Windsor, CT

Electrical Engineer - Multi-Site

Controls Engineer

Electrical Engineer IV

Get Engineer Jobs in Windsor, CT alerts