Electrical Testing

Electrical Testing Engineer Jobs

26 jobs found

Today

Principal PCB & Substrate Layout Engineer

Belcan Phoenix, AZ

Phoenix, AZ

Today

$98 - $98/hr Contract Electrical Engineering Senior Design

Apply Now

Job Description

Belcan is seeking a Principal PCB & Substrate Layout Engineer to provide technical leadership in high-speed interfaces and dense substrate layout for defense and aerospace microelectronics. This onsite Phoenix contract role calls for a Bachelor’s degree in engineering and at least ten years of hands-on PCB and HDI layout experience, with a focus on multi-die packaging and flip-chip implementations. The right candidate will guide complex designs from concept through fabrication, delivering robust PCBs and substrates that meet stringent military and aerospace standards.

Responsibilities

Lead the design, layout, and analysis of intricate electrical and mechanical systems, including high-density interposers, substrates, and multi-layer PCBs, handling power, digital, analog, and RF signals across multiple dies with a primary emphasis on flip-chip configurations.
Perform hands-on work on high-speed, multi-layer packaging and HDI interconnects, including blind and buried vias, BGAs, RF sections, design for test, impedance calculations, crosstalk, differential pairs, stack-ups, vias, EMC, and material studies/selection.
Ensure designs follow supplier design-for-manufacturing rules and align processes with supplier capabilities.
Prepare fabrication drawings that reflect design intent and support seamless transfer to fabrication suppliers.
Support package material characterization with frequency-dependent models, including skin effects, surface finish, roughness, dielectric loss, and dielectric constant.
Collaborate with peers to review artwork and drawings at various stages and participate in final design reviews for fabrication and assembly.
Support multidisciplinary investigations and feasibility studies across engineering disciplines.
Provide technical guidance interfacing with customers, subcontractors, assemblers, fabricators, vendors, operations, quality, supply chain, and supporting organizations.
Tackle complex issues that require in-depth analysis of variable factors and apply systems thinking to evaluate the impact on the overall system.
Contribute across disciplines to help the team achieve goals and deliverables.

Requirements

Bachelor’s Degree in Engineering or equivalent education and experience.
10+ years of PCB and/or High-Density Package Layout design experience using industry-standard tools such as Cadence APD+.
Proficiency with APD+ physical and electrical constraint editor.
Experience with HDI stack-ups, including blind and buried microvias, RF dielectric materials, and trace widths/spacings from approximately 15 μm down to 2 μm or smaller.
Experience with 2.5D devices, interposer or substrate design, flip-chip, surface mount, die stacking, package stacking, and substrate stacking techniques.
Experience using a Cadence schematic/netlist-driven CAD layout process (APD+/Allegro) and supporting tools.
High-end FPGA package or board design experience.
Ability to collaborate with the Mechanical team to develop full 3D models for fit checks and thermal analysis.
Understanding of layout techniques for digital, analog, and RF designs.
Knowledge of electronic packaging techniques.
Experience using a CAM package for manufacturing data validation; familiarity with CAM350 and Blueprint is preferred.
Working knowledge of JEDEC/IPC design, fabrication, and assembly specifications.
Experience creating assembly documentation and fabrication deliverables per company and industry standards.
Must be a US Person.
Ability to work effectively both independently and as part of a team.
Commitment to teamwork, execution, and clear communication as part of the company culture.

Technologies

Cadence APD+ (Allegro)
APD+ physical and electrical constraint editor
CAM 350
Blueprint

Benefits

Health care
Dental
Vision
Life insurance
401(k)
Education assistance
Paid time off including PTO, holidays, and legally required paid leave

You will be a part of

You will join a team focused on the rapid development of affordable, chip-scale, secure, open system architecture devices. This cutting-edge capability supports the Department of Defense need for made-in-USA microelectronics that equip warfighters with state-of-the-art, trusted military-grade products built on leading commercial technologies.

To succeed in this role, you should have the following skills and experience

Bachelor’s Degree in Engineering or equivalent education and experience.
10+ years of PCB and/or High-Density Package Layout design experience using Cadence APD+ or equivalent tools.
Experience with APD+ physical and electrical constraint editor.
HDI stack-ups including blind and buried microvias, RF dielectric materials, and fine trace widths/spacing down to 2 μm or smaller.
Experience with 2.5D devices, interposer/substrate design, flip-chip, die stacking, and related techniques.
Cadence schematic/netlist-driven CAD layout workflow experience.
High-end FPGA packaging or board design experience.
Ability to work with Mechanical teams to create 3D models for fit and thermal checks.
Understanding of digital, analog, and RF layout techniques.
Knowledge of electronic packaging techniques.
Experience using CAM packages for manufacturing data validation; CAM350 and Blueprint familiarity preferred.
Working knowledge of JEDEC/IPC design, fabrication, and assembly specifications.
Experience producing assembly documentation and fabrication deliverables per standards.
Must be a US Person.
Ability to work well both independently and within a team, upholding teamwork, execution, and communication values.

View full job page →

11d ago

Electrical Process Development Engineer III

Brooksource Arden Hills, MN

Arden Hills, MN

11d ago

$50 - $55/hr Full time Electrical Engineering Automation Design Engineering

Apply Now

Job Description

Brooksource offers an onsite Electrical Process Development Engineer III role in Arden Hills, MN with a competitive pay rate of $50 to $55 per hour. This position focuses on leading the development, validation, and optimization of electrical test processes for medical device products, delivering scalable automated test systems across both manufacturing and R&D. A bachelor’s degree and at least five years of relevant experience are required.

Responsibilities

Lead electrical test strategy and define scalable, automated test architectures across products and programs
Design and guide the development of advanced automated test systems, with a strong emphasis on LabVIEW based solutions; initial LabVIEW training will be provided
Review and approve test methods, validation approaches, and technical documentation
Resolve complex test, yield, and correlation issues, driving root cause analysis across hardware and software systems
Provide technical leadership and mentorship to junior engineers and team members
Collaborate with leadership, R&D, Quality, and Manufacturing to align on test strategy and execution
Support audits, regulatory inspections, and design transfer activities, ensuring compliance with all standards
Oversee test validation activities, including correlation studies and measurement system analysis (MSA)
Perform and guide hands-on work in lab and manufacturing environments using benchtop tools and electrical test equipment
Drive continuous improvement initiatives focused on test efficiency, scalability, and reliability

Requirements

Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Engineering, Software Engineering, or related field
5–8 years of relevant experience in electrical engineering, test engineering, or software development
Strong expertise in electrical systems, automated test development, and software engineering principles
Experience working in a regulated environment (ISO or medical device strongly preferred)
Proven experience designing scalable test architectures and automated systems
Strong experience with programming languages such as Python or C
Deep understanding of test validation, measurement system analysis (MSA), and correlation methodologies
Experience with hardware development, test fixtures, and benchtop lab equipment
Comfortable working in a hands-on lab environment, building, testing, and troubleshooting physical systems
Demonstrated ability to mentor engineers and provide technical leadership
Strong analytical, problem-solving, and decision-making skills
Effective communication skills with the ability to interface with leadership and cross-functional teams

Technologies

LabVIEW
Python
C

Benefits

401(k) with company match, fully vested after eligibility
Medical, dental, and vision insurance
Health Savings Account (HSA) and Dependent Care Flexible Spending Account (FSA)
Supplemental coverage options
Paid time off, sick time, and paid company holidays
Employee Assistance Program (EAP) offering virtual counseling, financial and legal services, life coaching, and more

View full job page →

15d ago

Electrical Engineer

Oliveda International Inc. Culver City, CA

Culver City, CA

15d ago

$95k - $115k/yr Full time Electrical Engineering Design Design Tools

Apply Now

Job Description

Oliveda International is seeking an experienced Electrical Engineer to lead design, prototyping, and validation of wearable health devices and smart wearables onsite in Culver City, CA.

Responsibilities

Lead the electrical design and integration of smart wearable health devices, covering analog and mixed-signal circuits, sensor systems, and low-power architectures.
Develop prototypes and iterate on wearable devices to improve user experience and deliver accurate, reliable health metrics.
Collaborate with mechanical, firmware, software, and UX teams to translate cross‑disciplinary ideas into functional hardware.
Define and execute validation and calibration protocols for sensors and electrical subsystems.
Perform benchtop and on‑body testing to ensure high performance across diverse conditions and users.
Identify issues, troubleshoot, and optimize hardware for accuracy, durability, and manufacturability.
Partner with internal teams and external vendors to select, integrate, and validate sensors and components.
Support scale‑up from prototype to production, ensuring compliance with regulatory and safety standards.
Stay current with emerging wearable technologies and trends in health, wellness, and consumer devices.

Requirements

Bachelor’s or Master’s degree in Electrical Engineering or related field (PhD a plus).
5+ years of experience in electrical engineering for wearable devices, health sensors, or consumer IoT hardware.
Deep understanding of analog/mixed‑signal circuits, PCB design, low‑power systems, signal acquisition, and sensor integration.
Experience with testing, validation, and debugging of wearable electronics.
Proficiency with embedded systems, firmware collaboration, and data acquisition tools (C/C++, Python, MATLAB).
Strong problem‑solving skills and ability to thrive in fast‑paced, cross‑functional teams.
Passion for health, wellness, beauty tech, and delivering transformative user experiences.

Technologies

C
C++
Python
MATLAB

Compensation & Benefits

Salary: USD 95,000 – 115,000 per year (based on experience)
On-site role in Culver City, CA
Opportunity to represent a purpose-driven global skincare brand
Professional growth and development opportunities within Oliveda
401(k), health, dental, and vision insurance
Paid time off and employee discount

View full job page →

15d ago

Electrical Engineer

Verigon LLC Tempe, AZ

Tempe, AZ

15d ago

$70k+/yr Full time Electrical Engineering Design Electrical Design

Apply Now

Job Description

Verigon LLC offers a collaborative engineering culture focused on lean manufacturing, data driven decision making, and opportunities to grow as a technical leader. This onsite Electrical Engineer role in Tempe, AZ delivers a competitive annual salary of USD 70,000 and a comprehensive benefits package that supports health, retirement, education, and work life balance. The position requires relocation before starting and involves travel up to 25 percent.

Responsibilities

Design and development of test fixtures and systems to meet customer requirements.
Troubleshoot using a systematic approach and repairing electronic components, printed circuit board assemblies, hybrid circuits, equipment, and systems.
Develop, qualify and conduct test programs for flying probe test systems and In-Circuit Test systems.
Analyze and interpret test yield data and report trends and weaknesses using lean manufacturing principles.
Any other relevant duties as assigned

Requirements

A Bachelor’s degree in Electronics or equivalent is required.
Minimum 8 years' experience in Electrical Engineering.
Individual must be able to develop flying probe programs proficiently after receiving a reasonable amount of training.
Self-management of personal workload is important as multi-tasking and meeting goals is a constant requirement.
Willing to do what is needed in order to elevate the success of the company.
Able to work while looking through a microscope and must have steady hands for detailed small items work.
Must be able to read and interpret documents such as schematics, datasheets, and equipment manuals.
Position requires proficiency in writing routine reports and correspondence.

Technologies

Flying probe test systems
In-Circuit Test (ICT) systems

Benefits

401(k)
401(k) matching
Dental insurance
Employee assistance program
Health insurance
Health savings account
Life insurance
Paid time off
Referral program
Tuition reimbursement
Vision insurance

Work Environment

The work environment is typical of a manufacturing setting where hazardous materials may be present. Verigon is an ITAR controlled company. All offers of employment are contingent upon a successful background check and drug screen.

Job Details

Job Type: Full-time
Location: Tempe, AZ (onsite) — Tempe, AZ 85284
Salary: USD 70,000 per year
Relocation: Required before starting work (Tempe, AZ 85284)
Travel: 25% (required)
Work Location: In person

View full job page →

22d ago

Experienced Critical Power Field Technician

Pearce Services Richmond, VA

Richmond, VA

22d ago

$35 - $45/hr Full time Electrical Engineering Battery Energy Storage Battery Storage

Apply Now

Job Description

Benefits

Pearce Services in Richmond, VA offers an onsite role with a competitive compensation package and a comprehensive benefits program designed to support your growth in critical power services.

Medical, dental, and vision coverage
Flexible spending accounts and an optional Health Savings Account
Paid time off including vacation and holidays
401(k) retirement plan with company matching
Life insurance and tuition reimbursement
Opportunities for professional development
Company provided vehicle, phone, and a laptop or tablet
Tools and safety equipment supplied

Responsibilities

Execute preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS units, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment
Diagnose electrical and control system faults using schematics, test gear, manufacturer documentation, and best-practice standards
Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure
Respond to emergency service requests and restore client systems while upholding safety and quality standards
Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services
Document service activities through accurate service reports, maintenance records, and clear customer communications
Build strong customer relationships through technical expertise, responsiveness, and reliable service delivery
Mentor junior technicians and support field training by sharing troubleshooting approaches, safety practices, and technical knowledge
Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements
Support additional field service tasks as business and customer needs evolve

Requirements

Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical fields are encouraged to apply
Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure
Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred
Solid understanding of AC and DC electrical theory, power distribution systems, and battery technologies
Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation
Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools
Proven ability to independently troubleshoot and resolve complex electrical and electronic system failures
Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders
Commitment to safety, quality workmanship, and professional accountability
Valid driver’s license and willingness to travel within the assigned service territory, including occasional overnight travel as required

Technologies

Multimeters
Power quality analyzers
Battery testing equipment
Battery monitoring systems

Physical and work environment

Valid driver's license with an acceptable driving record and ability to meet company vehicle requirements
Able to pass required pre-employment screenings, including drug screening and background checks where applicable
Ability to lift and move equipment and materials weighing up to 100 pounds with or without assistance
Frequent standing, walking, bending, kneeling, crouching, overhead reaching, and working in confined or restricted areas
Work safely around energized electrical equipment and within mission-critical customer environments
Ability to perform physically demanding work for extended periods while maintaining safety and accuracy
Capability to manage multiple priorities in fast-paced field settings while upholding safety and quality standards
Willingness to travel within the service territory, including overnight and multi-day trips; per diem provided for qualifying travel
Willingness to participate in an on-call rotation and respond to customer emergencies as needed
Ability to obtain and maintain Security Clearance for access to customer facilities such as data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations

View full job page →

23d ago

Electrical Engineer - RF Systems

Asylon Norristown, PA

Norristown, PA

23d ago

$115k - $150k/yr Full time Electrical Engineering Altium Designer Design

Apply Now

Job Description

Asylon is seeking an Electrical Engineer with RF and EMI expertise to design, test, and maintain electrical and RF systems for DroneCore robotics products, on-site in Norristown, PA.

Responsibilities

Architect, analyze, and optimize wireless communication systems for the Asylon robot platforms
Design, develop, test, and sustain DroneCore electronics, including circuit boards and wire harnesses
Ensure Asylon robots withstand electromagnetic interference in demanding environments
Enhance existing systems to meet customer requirements
Establish manufacturing and QA processes for PCBs, wire harnesses, and other electrical components to meet industry standards
Incorporate design for manufacturability and other manufacturing considerations toward scalable mass production
Develop and execute a validation plan for the system electronics
Address reliability, yield, and performance issues from development through production
Perform RF testing and troubleshooting to confirm the reliability and performance of communications and sensor subsystems
Stay current with emerging RF and electronics technologies and industry trends to sustain innovation

Requirements

Bachelor's degree in electrical engineering, electronics engineering, computer engineering, or related field
3+ years of professional experience
Proficiency with RF measurement tools such as network analyzers, signal analyzers, and near-field scanners
Electrical design experience including circuit design, schematic capture, and board layout/design, preferably with Altium experience
Experience prototyping and fabricating new products
Circuit simulation
Ability to read and interpret schematics and electrical diagrams
Must be able to obtain and hold a U.S. security clearance
Passion for robotics

Technologies

Altium
Python
MATLAB
C++
C

Benefits

Competitive salary and equity packages
401(k) and 401(k) matching
Flexible vacation and sick time
Medical, dental, and vision insurance
Life insurance
Paid time off
Relocation assistance
Employee assistance program
Parental leave
Retirement plan
Vision insurance

Bonus Points

Analog design
PCB fabrication, testing, and debugging
High speed digital design
Programming languages to support electronics design, simulation, and testing (Python, MATLAB, C++, etc.)
Firmware development in C and C++

Application Question

Answer only "yes" or "no". Are you a U.S. Person as defined by 22 C.F.R. §120.62? This includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

View full job page →

24d ago

Transformer Design Engineer

Custom Magnetics North Manchester, IN

North Manchester, IN

24d ago

$75k+/yr Full time Electrical Engineering Design Design Engineering

Apply Now

Job Description

Custom Magnetics is seeking a Senior Transformer Design Engineer to lead the design, testing, and ongoing support of bespoke transformers, inductors, and related magnetic components from concept through production. This onsite role in North Manchester, Indiana, emphasizes close collaboration with customers to translate requirements into manufacturable solutions while addressing electrical, mechanical, thermal, and cost challenges. The position offers USD 75,000 per year and requires a hands-on engineer with at least five years of relevant experience and a bachelor’s degree.

Responsibilities

Design and develop custom transformers, inductors, reactors, and related magnetic components.
Evaluate new designs for electrical performance, manufacturability, cost, and reliability.
Collaborate directly with customers to create products meeting electrical, mechanical, thermal, and cost requirements.
Support new product introduction by transitioning designs into manufacturing.
Test and evaluate first-article production units.
Develop and maintain automated test programs using Voltech automatic test equipment.
Design, build, and troubleshoot transformer test fixtures.
Analyze production rejects and determine root causes.
Evaluate returned products and perform failure analysis.
Test engineering samples and accurately record electrical performance data.
Assist manufacturing personnel in resolving technical and production issues.
Prepare engineering documentation, specifications, and test reports.
Support customers by answering technical questions and assisting with product development.
Participate in continuous improvement efforts related to product design and manufacturing processes.

Requirements

Minimum of five years of experience designing custom transformers, inductors, or other wound magnetic components for manufacture.
Strong understanding of magnetic component design, magnetic materials, winding techniques, insulation systems, and electrical performance.
Knowledge of transformer equivalent circuits, core losses, leakage inductance, parasitic capacitance, thermal design, and dielectric insulation systems.
Digital multimeters
Oscilloscopes
LCR/impedance meters
Hi-Pot and insulation resistance testers
Experience troubleshooting electrical and manufacturing problems
Proficient with Microsoft Office and comfortable learning engineering and manufacturing software
Strong analytical and problem-solving skills
Excellent written and verbal communication skills
Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, or equivalent industry experience

Technologies

Voltech automatic test equipment
Digital multimeters
Oscilloscopes
LCR/impedance meters
Hi-Pot and insulation resistance testers
Microsoft Office

Benefits

Competitive salary based on experience
Health insurance
Paid vacation and holidays
Paid time off
Retirement plan
Relocation assistance
Growth and advancement opportunities
Stable, family-owned company with long-term customers
Friendly, team-oriented work environment

3mo ago

Electrical Design Engineer

Spang & Company Pittsburgh, PA Hybrid

Pittsburgh, PA

3mo ago Closed

Full time Electrical Engineering Analog Design Design

Electrical Testing Engineer Jobs

Get Electrical Testing Engineer Jobs alerts