Arc Flash Analysis

Arc Flash Analysis Engineer Jobs

4 jobs found

1d ago

Entry-Level Electrical Distribution Engineer

C. H. Guernsey & Company Oklahoma City, OK

Oklahoma City, OK

1d ago

Full time Electrical Engineering Arc Flash Analysis Design

Apply Now

Job Description

Based in Oklahoma City, C. H. Guernsey & Company offers a collaborative and innovative culture, competitive compensation and benefits, robust professional development and mentorship, ESOP ownership opportunities, and the chance to work on meaningful utility infrastructure projects. This entry-level role provides hands-on experience under guidance in planning, design, analysis, and delivery of electrical distribution projects.

Responsibilities

Assist in the design of both overhead and underground distribution systems.
Contribute to engineering analyses using Milsoft WindMil, LightTable, and related software.
Support coordination studies, system modeling, and Arc Flash Hazard analyses.
Participate in field inspections, data collection, staking, and make-ready surveys.
Prepare drawings, calculations, specifications, and other engineering documentation.
Learn and apply standards from RUS, NESC, IEEE, ANSI, and NEC.
Collaborate with project managers, senior engineers, utility clients, and design staff.
Assist with construction observation and project closeout activities.
Engage in technical training and work toward professional licensure.

Requirements

ABET-accredited Bachelor's Degree in Electrical Engineering (required).
0–3 years of electrical distribution engineering experience.
Engineer Intern (EI) certification or ability to obtain preferred.
Strong communication, analytical, and problem-solving skills.
Desire to learn and grow in a collaborative environment.

Technologies

Milsoft WindMil
LightTable
Microsoft Word
Microsoft Office

Benefits

Collaborative, innovative culture
Competitive compensation and benefits
Professional development and mentorship
ESOP ownership opportunity
Meaningful utility infrastructure projects

Physical Requirements

Ability to sit or remain in a stationary position for extended periods (up to 50%)
Ability to walk within the office or on job sites (approximately 25%)
Full range of motion for site-based work, including stooping and standing (approximately 25%)
Manual dexterity to operate standard office equipment
Effective verbal communication and clear visual focus on screen-based work
Must be able to lift and carry up to 30 lbs of field equipment as needed

Preferred Experience

Exposure to electric utility projects
Familiarity with WindMil or LightTable
Knowledge of RUS, NESC, IEEE, ANSI, and NEC standards

View full job page →

15d ago

Electrical Distribution Engineer

Samsung Electronics Taylor, TX

Taylor, TX

15d ago

$76k - $145k/yr Full time Electrical Engineering Analytical Skills Arc Flash Analysis

Apply Now

Job Description

Samsung Electronics offers an onsite opportunity in Taylor, Texas for an Electrical Distribution Engineer who can oversee commissioning, startup, and qualification of new power distribution assets while keeping existing industrial infrastructure reliable, safe, and high performing. The role is structured for first shift, Monday through Friday, 8:00 am to 5:00 pm, with a salary range of USD 76,000 to 145,000 per year. A Bachelor’s degree in Electrical or Electronics Engineering from an ABET-accredited program and at least four years of industrial electrical maintenance experience are required. Semiconductor fab experience is preferred, and a Professional Engineer license in Texas is a plus. This position blends hands-on field execution with rigorous documentation, standards compliance, and cross-functional coordination to deliver robust, fault-tolerant electrical systems.

Benefits

Medical, dental, and vision insurance
Life insurance and 401(k) matching with immediate vesting
Onsite café(s) and workout facilities
Paid maternity and paternity leave
PTO plus 2 personal holidays and 10 regular holidays
Wellness incentives and MORE

Responsibilities

Coordinate with design engineering, construction, operations, and maintenance teams to align requirements and schedules
Lead pre-commissioning, functional testing, and energization of medium and low voltage switchgear, transformers, UPS, generators, and motor-control equipment
Verify protection schemes with relays, circuit breakers, and electronic trip units meet design intent and industry standards (IEEE, IEC, NEMA)
Perform detailed safety verifications before applying power, including lock-out/tag-out, arc-flash analysis, and grounding checks
Ensure work adheres to applicable codes (NFPA 70E, NEC, IEC 61850, ANSI/IEEE) and internal procedures
Produce commissioning reports, as-built drawings, punch lists, and close-out documentation
Log deficiencies, develop corrective-action plans, and track resolutions in the project management system
Interface newly commissioned assets with SCADA/EMS platforms; validate telemetry, alarms, and remote control functions
Coordinate with automation engineers to ensure proper tag mapping and data integrity
Perform fault diagnosis, performance validation, and corrective actions on new and legacy equipment
Work schedule: 1st Shift, Mon-Fri, 8:00 am to 5:00 pm

Requirements

Bachelor of Electrical or Electronics Engineering from an ABET-accredited institution
Minimum four years of electrical maintenance experience in an industrial setting; semiconductor fab experience is preferred
Professional Engineer license issued or recognized by the State of Texas is a plus
Working knowledge of IBC, IFC, and other codes and standards applicable to industrial power distribution system design and reliability
Detailed understanding of industrial power distribution systems design, maintenance, and electrical power monitoring equipment
Daily use of a Computerized Maintenance Management System to manage assets and maintenance schedules
Working knowledge of OSHA General Industry and Construction standards
Experience with Microsoft Excel for data analysis, including Pivot Tables, VLOOKUP data linking, and simple scripting
Ability to work overtime or on non-scheduled days as required

Technologies

SCADA
EMS (Energy Management System)
CMMS
Microsoft Excel

U.S. Export Control Compliance

This role may require access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization.

Trade Secrets Notice

By applying, you agree not to disclose to Samsung or encourage Samsung to use any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity.

View full job page →

23d ago

Electrical Engineer IV

CRB Atlanta, GA 🇺🇸 Remote

Atlanta, GA

23d ago

Full time Electrical Engineering Senior Arc Flash Analysis

Apply Now

Job Description

CRB seeks an Electrical Engineer IV to lead the design and implementation of low- and medium-voltage electrical systems on complex building and industrial projects from Atlanta, GA, with remote-work options.

Responsibilities

Lead electrical design across all project phases (programming, design development, construction documentation, and construction support) for complex building and industrial initiatives
Design and coordinate low- and medium-voltage distribution systems, including switchgear, panelboards, transformers, feeders, grounding, and protective devices
Perform advanced power system analyses such as load studies, short-circuit analysis, voltage drop, and arc flash evaluations
Develop construction drawings and specifications that are fully code-compliant and ready for installation
Identify and resolve complex existing conditions through site visits and field surveys
Direct and coordinate the work of electrical engineers and designers across experience levels
Collaborate with project managers on scope definition, scheduling, staffing, and electrical discipline budgets
Work with architectural, mechanical, structural, process, and construction teams to deliver integrated electrical designs
Coordinate with contractors, vendors, utilities, and equipment manufacturers to support the design and installation of electrical systems
Provide technical leadership during construction, including RFI responses, submittal reviews, site observations, and punch-list development
Perform thorough quality reviews of electrical calculations, drawings, and documents to ensure accuracy and overall project quality
Mentor junior and mid-level electrical engineers and designers
Foster best practices, knowledge sharing, and continuous improvement within the electrical team

Requirements

ABET-accredited bachelor’s degree in Electrical Engineering or Architectural Engineering
15+ years of electrical engineering experience, ideally within a consulting or design firm environment
Active Professional Engineer (PE) license
Proven track record leading and delivering projects involving building or industrial power systems and voltage-based electrical infrastructure

About CRB

CRB provides sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. The company has more than 1,100 employees and focuses on delivering best-in-class solutions that drive client success and positive outcomes for staff and communities.

View full job page →

2mo ago

Electrical Controls Design Engineer

Nammo Defense Systems, Inc Perry, FL

Perry, FL

2mo ago Closed

Full time Electrical Engineering Arc Flash Analysis AutoCAD

This position is no longer accepting applications (closed May 22, 2026).

Job Description

In Perry, Florida, this on-site role focuses on designing, developing, and refining electrical control systems for Nammo Perry's munitions production and testing operations. The engineer will collaborate with design engineers and electrical controls engineers to ensure that equipment meets technical requirements and adheres to safety and regulatory standards throughout the production lifecycle.

Responsibilities

Design, Develop, and Layout all Electrical Panels for new and existing equipment.
Specify all components used in electrical panels and assure those components meet all safety and electrical requirements.
Document all new and existing equipment panel layouts, electrical schematics, and pneumatic schematics utilizing AutoCAD Electrical 2024.
Experience in Arc-flash hazard analysis / calculations.
Experience in designing and specifying the electrical panels and components that meet hazardous location wiring codes.
Ensure that equipment is installed and maintained in conformance with current codes and regulations.
Recommend improvements to new and existing equipment to optimize the production process and determine corrective actions.
Serve as primary point of contact for all electrical controls related troubleshooting.
Determine preventative maintenance actions and provide supporting documentation to maintenance.
Collaborate with the maintenance and operational groups on preventative maintenance, machine repair, predictive maintenance, equipment performance, and design improvements.
Maintain good employee relations, and adhere to our Affirmative Action Plan, Labor laws and EEOC rules and regulations.
Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices.
Other duties as assigned.

Requirements

Bachelor's degree in electrical engineering or combination of education and 5 years work experience.
At least 3 years of experience in a manufacturing environment providing technical support to fully automated, semi-automated and manual processes.
Familiar with PLC/HMI programming (Preferably Emerson PAC Machine Edition Version 10).
Strong fundamental knowledge of control and electrical system design and its application in automated industrial designs including specification of vision, power, sensor, inspection, and communications systems.
Proficient in AutoCAD Electrical Version 2024.
Proficient with MS Office Suite.
Familiar with Cognex vision cameras.
Ability to create and troubleshoot electrical and pneumatic schematics.
Ability to program and troubleshoot VFDs, servo actuators and robots.
Ability to read and follow mechanical drawings.
Ability to balance multiple projects at one time.
Familiarity with Statistical Process Control (SPC) within an industrial environment.
Familiarity with Process Safety Management (PSM) plans or equivalent.
Self-starter, ability to work independently and handle multiple projects timely and efficiently; meeting specified deadlines.
Good communication skills, both oral and written.

Technologies

AutoCAD Electrical 2024
Emerson PAC Machine Edition Version 10
Cognex vision cameras
MS Office Suite

Benefits

Monday - Thursday work week with 10-hour days
Relocation assistance provided
401(K) with a 6% company match
100% Employer-Paid Employee Only Medical Plan Option
Employer Health Saving Account Contributions
Generous Time Off benefits

Working Conditions and Requirements

Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy which includes random testing.
Must have good vision (may be corrected).
Must be able to communicate written and verbally.
Must be able to stand/walk/sit for prolonged periods of time.
Must be able to travel.
Must have stamina to work more than the scheduled workday when needed, including nights and weekends.
Must be able to lift up to 20 lbs.
Must be physically present during business hours.

View full job page →

Arc Flash Analysis Engineer Jobs

Entry-Level Electrical Distribution Engineer

Electrical Distribution Engineer

Electrical Engineer IV

Electrical Controls Design Engineer

Get Arc Flash Analysis Engineer Jobs alerts