Simulation System

Simulation System Engineer Jobs

4 jobs found

1d ago

Senior Electrical Engineer (Control)

JTEKT North America Plymouth, MI

Plymouth, MI

1d ago

Full time Electrical Engineering Senior ALM

Apply Now

Job Description

Technical leadership for control system development on electromechanical chassis, including steering and driveline applications, with cross-functional coordination and full-lifecycle technical execution.

Responsibilities

Direct cross-functional development programs for control systems, aligning technical deliverables, priorities, and timing with customer expectations and internal milestones.
Support business development and RFQ efforts by leading technical reviews, assessing control system requirements, creating compliance matrices, estimating engineering scope, and contributing to customer proposals.
Oversee system-level development of safety-critical chassis control systems, defining architecture, developing closed-loop strategies, and ensuring ASPICE and internal process compliance.
Own control system requirements, dynamic models, and architecture design with full traceability throughout the development lifecycle.
Develop and refine control algorithms, including signal processing, closed-loop controller design and compensation, plant modeling, stability analysis, and performance optimization.
Define verification strategies and test procedures for control system requirements, covering model-in-the-loop, software-in-the-loop, hardware-in-the-loop, production, and vehicle-level validation of closed-loop performance.
Lead hardware-in-the-loop bench actuator controller development and ongoing improvement.
Develop control-oriented interfaces and test tool capabilities in embedded environments, enabling CAN-based measurement, calibration, tuning, debugging, and customer demonstrations using CANape, CANoe, and CANalyzer.
Analyze, tune, and debug control algorithms, embedded software, and electrical hardware across simulation, laboratory, production line, and vehicle environments.
Support the introduction of new products to production and ongoing production support for existing products.
Facilitate communication and strategic coordination between the plant and the technical center, including troubleshooting support, process improvement, and technical reviews.
Occasionally work overtime and on weekends as directed by supervision to complete essential duties.
Foster responsive, cooperative relationships with internal and external customers, upholding professionalism and respect.

Requirements

Working knowledge of designing, evaluating, and integrating vehicle control systems and subsystems, diagnostics, control modules/software, and electrical systems.
Strong grasp of classic and modern control theory, including feedback control, lead/lag and notch compensations, observers, stability analysis, and design.
Experience with Model Based Systems Engineering, processes, and toolchains.
Proficiency in Matlab/Simulink, CAN tooling (eg, Vector CANape, CANoe, CANalyzer), and related automotive development tools.
Familiarity with ASPICE processes is preferred.
Strong problem solving and analytical abilities: diagnose root causes from complex data, differentiate symptoms, apply lessons learned, anticipate issues, and develop contingency plans.
Self-starter with excellent verbal and written technical communication skills.
Bachelor's degree in Electrical Engineering or equivalent required; MS preferred.
Minimum six years of automotive experience with chassis electronic components.
Experience developing control algorithms and engineering project management is required.
Proficiency with toolchains including ALM, requirements and traceability tools, system architecture tools, and test tools.
Experience with FMEA, FTA, and structured problem solving methods (8D, 5Y, etc.).
Vehicle dynamics and model correlation experience preferred.
Experience with generative AI, machine learning, and data analysis toolchains is a plus.
Familiarity with environmental, mechanical, and electrical verification testing methodologies in automotive contexts.
Experience in safety critical electric system development (steering, brakes, powertrain) compliant with ISO 26262 is preferred.

Technologies

MATLAB
Simulink
CANape
CANoe
CANalyzer
ALM

Education and Experience

Bachelor's degree in Electrical Engineering or equivalent required; MS preferred.
At least six years of automotive experience with chassis electronic components.
Experience with control algorithms development and engineering project management is required.
Experience with toolchains including ALM, requirement and traceability management tools, system architecture tools, and test tools.
FMEA, FTA, and structured problem solving techniques (8D, 5Y, etc.).
Vehicle dynamics and vehicle model correlation preferred.
Generative AI, machine learning, and data analysis toolchains are a plus.
Familiarity with environmental, mechanical, and electrical verification testing methodologies in automotive contexts.
ISO 26262 safety critical electric system development experience preferred (steering, brakes, powertrain).

Supervisory Responsibilities

This position has no supervisory responsibilities.

Work Environment and Location

Hybrid remote work arrangement in Plymouth, Michigan 48170.
Work is primarily in an office setting with substantial computer usage; occasional exposure to manufacturing areas with PPE requirements.
Travel by automobile and plane required approximately 5 to 10 percent of the time.

View full job page →

2d ago

Autonomy Systems Engineer

Liebherr Mining Equipment Newport News Co. Newport News, VA

Newport News, VA

2d ago

Full time Electrical Engineering 3d Modeling AutoCAD

Apply Now

Job Description

Liebherr Mining Equipment Newport News Co. is seeking an Autonomy Systems Engineer for an on-site role in Newport News, VA. This position centers on researching, developing, designing, and validating mechanical, electrical, and hydraulic hardware along with the associated control logic for large mining haul trucks and their autonomous counterparts.

Responsibilities

Design and integrate mechanical, electrical, hydraulic, and electro-mechanical systems for heavy mining haul trucks and autonomous variants.
Perform system calculations and simulations to verify performance.
Create schematic representations of mechanical, electrical, hydraulic, and electro-mechanical systems.
Collaborate with Mechanical, Hydraulic, Electrical, and other disciplines to define specifications and requirements that capture control system logic for haul truck functions.
Develop software modules or employ model-based design techniques to build control software.
Prepare detailed test requests to initiate component and system level testing and validation.
Work independently and as part of a team with engineers, designers, and production personnel on ad hoc projects.
Participate in the Engineering Development Program.
Research electric and hydraulic components for control system applications.
Analyze and optimize system designs and parameters using analytical methods.
Coordinate with other disciplines to specify appropriate control components (PLCs, computing platforms, HMI, and related hardware).
Estimate time and cost requirements for the development and serial production of haul truck systems.
Review customer design proposals, specifications, manuals, and related data.
Collaborate with engineers and personnel to develop operating procedures, resolve malfunctions, and provide technical information.
Train, mentor, and develop engineers and other personnel on operating procedures, resolving system malfunctions, and providing technical information (Autonomy).
Review and approve designs of mechanical and electrical systems to ensure conformance with engineering design and performance specifications (Autonomy).

Requirements

Systems Engineer 1: Master of Science (MS) or Bachelor of Science (BSME, BSEE, BS Mechatronics Engineer, or BSCompE) or Associate of Science (ASEE) with 10 years of relevant electrical experience in an engineering environment.
Systems Engineer 2: MS with 1 year of relevant electrical experience or BS with 2 years of relevant electrical experience in an engineering environment.
Systems Engineer 3: MS with 4 to 6 years of relevant electrical experience or BS with 6 to 8 years of relevant electrical experience in an engineering environment.
Systems Engineer 4 (Senior): MS with 6 to 8 years of relevant electrical experience or BS with 8 to 10 years of relevant electrical experience in an engineering environment.
Domestic and international travel up to 15% of the time.
Ability to obtain and maintain a valid driver’s license and passport.
Ability to maintain Mine Safety & Health Administration (MSHA) certification.

Technologies

Matlab/Simulink
nCode Glyphworks
CAD layouts in a 3D Modeling Software
3D Modeling Software
Microsoft Project
PLC’s
HMI

Benefits

Major medical, dental and vision insurance
401K plan with company match
Paid vacation and personal days
Competitive salary
Referral Bonus: Tier I

Our Offer

Referral Bonus: Tier I

View full job page →

11d ago

Mechatronics Engineer Launch Systems

SCEYE INC Moriarty, NM

Moriarty, NM

11d ago

Full time Electrical Engineering Aerospace Avionics

Apply Now

Job Description

SCEYE Inc seeks a Mechatronics Engineer to own the electromechanical release interface for HAPS launches, blending hardware rework, sensor integration, and simulation-driven validation. This on-site role in Moriarty, NM works closely with structural and systems engineers to ensure safe, reliable release sequences across missions.

Responsibilities

Own the design and integration of the electrical-to-mechanical interface that enables HAPS release from the launch system.
Define actuation logic, fault detection, and inhibit/arm sequencing to meet safety and reliability standards.
Collaborate with structural and systems engineers to ensure interface loads, timing, and environmental conditions are properly accounted for.
Audit current launch electronics to identify failure modes, single points of failure, and durability gaps.
Lead hardware rework efforts including PCB modifications, connector upgrades, harness improvements, and enclosure hardening for field use.
Define qualification and acceptance criteria for reworked assemblies and maintain revision-controlled hardware documentation.
Identify external data inputs required to condition or gate the release event, such as load, position, wind, and vehicle attitude.
Select, integrate, and validate sensors that provide those inputs to the release electronics.
Develop signal processing and threshold logic to convert sensor data into reliable go/no-go release decisions.
Improve wireless command and control range and reliability for launch electronics.
Assess and implement RF solutions suitable for open-field launch operations.
Perform link-budget analyses and conduct range testing under representative field conditions.
Build simulation models of launch motions and forces experienced by the HAPS during the release sequence.
Use simulation outputs to bound structural loads, validate release timing windows, and identify edge cases before live testing.
Update models as hardware evolves and validate them against instrumented test data.
Participate in assembling HAPS vehicles for individual missions alongside the broader assembly team.
Provide launch system expertise during integration to ensure compatibility between the vehicle and launch interface hardware.

Requirements

B.S. in Mechatronics, Electrical Engineering, Mechanical Engineering, or a closely related field.
3+ years of experience in electromechanical systems design, hardware bring-up, or embedded systems integration.
Hands-on PCB rework and electronics troubleshooting experience.
Experience integrating sensors (load cells, IMUs, encoders, or similar) into control or monitoring systems.
Familiarity with RF/wireless communication systems and link budget fundamentals.
Ability to read and produce electrical schematics and wiring diagrams.

Technologies

MATLAB/Simulink
Adams

Benefits

Chef-Prepared Lunches
Snacks & Refreshments
Wellness Perks
Dog-Friendly Environment
Comprehensive Health Coverage
401(k) with Match
High-Performance Culture

Preferred Qualifications

Experience with separation systems, pyrotechnic or electromechanical release mechanisms, or aerospace GSE.
Background in dynamics modeling or multibody simulation (MATLAB/Simulink, Adams, or similar).
Familiarity with DO-160 or MIL-STD environmental qualification testing.
Prior experience in a launch, range, or field operations environment.
Exposure to lighter-than-air, stratospheric, or HAPS vehicle programs a plus.

Working Conditions

Full-time, on-site in Moriarty, NM. The role spans lab bench electronics and field operations at the launch site. Must be comfortable working outdoors in variable weather conditions during launch campaigns. Physical requirements include lifting up to 50 lbs and working within or around large vehicle structures. Some travel to supplier sites or external test facilities may be required.

View full job page →

14d ago

Associate Design and Analysis Engineer (Electronic Sys Design & Analy)

Boeing Berkeley, MO

Berkeley, MO

14d ago

$92k - $124k/yr Full time Electrical Engineering Design Design Engineering

Apply Now

Job Description

Associate Design and Analysis Engineer on Boeing BT&E ASIT team in Missouri, focusing on developing integration test assets, real-time software test environments, and hardware/software testing and validation in simulation labs.

Responsibilities

Develop electrical schematics and designs for cabling, test hardware, and test stations
Select components for hardware designs and support procurement and fabrication of hardware
Integrate hardware systems and software in a test setting
Operate complex test stations, electronic test equipment, and test software
Test and validate to ensure designs meet operational and functional requirements
Resolve issues with fielded hardware and software across the product lifecycle

Requirements

Active U.S. Secret Security Clearance required (U.S. Citizenship required). An active clearance within the past 24 months is considered active
Bachelor of Science in Engineering with focus in Electrical, Mechanical or Aeronautical, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent directly related to the work statement
1+ years of experience testing and troubleshooting electronics and electrical systems
Experience reading, interpreting, and generating electrical schematics and technical specifications

Technologies

MATLAB
Simulink
Real-time operating systems

Salary

USD 91,800 - 124,200 per year

Benefits

Competitive base pay
Variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Paid and unpaid time away from work

Security and Compliance

Requires an active U.S. Secret Security Clearance (U.S. Citizenship required). A clearance active within the past 24 months is considered active
Export control: US-based job; U.S. Person required
Conflict of Interest (COI) assessment required

Additional Details

Relocation offered based on candidate eligibility
Employer will not sponsor applicants for employment visa status
Shift: 1st shift
Location: Berkeley, MO; Hazelwood, MO (onsite)
Education: Bachelor’s degree required

Equal Opportunity

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or veteran status or other characteristics protected by law.

View full job page →

Simulation System Engineer Jobs

Senior Electrical Engineer (Control)

Autonomy Systems Engineer

Mechatronics Engineer Launch Systems

Associate Design and Analysis Engineer (Electronic Sys Design & Analy)

Get Job Alerts