Protection and Control

Protection and Control Engineer Jobs

8 jobs found

Today

Engineer III – Protection & Control (P&C)

FindTalent Riverview, SC

Riverview, SC

Today

Full time Electrical Engineering Design Design Engineering

Apply Now

Job Description

Based in Riverview, SC, FindTalent is looking for an Engineer III for Protection & Control to lead on-site substation projects across the Southeast. The role centers on advanced protection and control design for HV utility facilities, including transmission substations, solar collector stations, and battery energy storage systems. You will manage design deliverables, schedules, and budgets, mentor junior engineers, and collaborate with cross-functional teams to ensure safe, cost-effective, high-quality project delivery.

Responsibilities

Lead the design and engineering of substation protection and control systems for voltages up to 500kV.
Develop and review one-line and three-line diagrams, AC/DC schematics, wiring diagrams, panel layouts, and SCADA communication designs.
Design and implement protective relaying schemes for transmission lines, buses, transformers, and capacitor banks.
Prepare detailed project scopes, cost estimates, schedules, and technical documentation.
Perform system studies including coordination, fault current, insulation coordination, and voltage drop analyses.
Provide engineering support during construction, including site visits and issue resolution.
Lead, mentor, and review the work of junior engineers and designers to ensure technical accuracy and compliance with standards.
Collaborate closely with internal teams, contractors, and clients to maintain clear communication and successful project execution.
Ensure compliance with all safety, quality, and engineering standards.
Support proposal development, project budgeting, and client presentations as needed.

Requirements

Bachelor’s degree in Electrical Engineering from an EAC/ABET-accredited institution (or equivalent).
Professional Engineer (PE) license preferred; ability to obtain within one year required.
5–7 years of progressive experience in substation protection and control engineering.
Strong understanding of protective relaying fundamentals and utility substation design principles.
Experience with P&C design software, protective relay settings, and system study tools.
Working knowledge of project management practices, budgeting, and scheduling.
Excellent organizational and problem-solving skills, with a keen attention to detail.
Proficiency with Microsoft Office and CAD or design software used in P&C projects.
Effective communication and leadership skills with the ability to manage multiple priorities.

Technologies

SCADA
Microsoft Office
CAD (design software)
P&C design software

Additional Information

Full-time onsite position in the Southeast.
Occasional travel required for project support and site visits.
Flexibility to work extended hours during key project phases.

Why Apply Through FindTalent?

FindTalent partners with leading engineering firms to connect professionals with impactful roles in the energy and utility sectors. This is a prime opportunity to advance your career by contributing to essential infrastructure projects that power communities and drive the clean energy transition.

View full job page →

6d ago

Experienced Protection and Control Engineer

Ampirical Covington, LA 🇺🇸 Remote

Covington, LA

6d ago

$80k - $140k/yr Full time Electrical Engineering AutoCAD Design

Apply Now

Job Description

Experienced Protection and Control Engineer at Ampirical, based in Covington, LA with remote work options and in-office preference in Duluth, GA, focusing on protection and control design for transmission and distribution substations, with client and vendor interface and mentorship responsibilities.

Responsibilities

Assess and select protection and control schemes appropriate for transmission and distribution substations.
Choose protection devices, verify correct sizing, and manage material procurement.
Prepare scopes of work, estimates, and drawing packages including wiring diagrams, schematics, protection panels, and one-line and three-line diagrams.
Perform load calculations for panels, battery systems, voltage drop, and other substation components.
Ensure adherence to client standards and relevant relay protection regulations and industry guidelines.
Provide field support and conduct pre-inspections for turnkey substation projects involving protection panels, breakers, transformers, control houses, and related equipment.
Interface with clients and vendors to ensure project alignment and technical accuracy throughout the lifecycle.
Mentor junior engineers and offer technical guidance to project teams.
Collaborate with internal groups to revise and maintain design and construction scope processes.

Requirements

Bachelor’s degree in Electrical Engineering from an ABET‑accredited university.
FE exam required for Engineer III and Engineer IV, or plus two years of experience in lieu of the FE.
Minimum 3 years of protection and control design experience in the utilities or energy sector.
More than 5 years of experience with demonstrated technical depth and project leadership.
Experience with ETAP software.
Experience with WinIGS software.
Experience with IEEE 80 and IEEE 998 standards.
Knowledge of SCADA, automation, relay settings, RTU configuration, and core protection and control engineering concepts.
Experience in the electric utility industry.
Strong communication and collaboration skills.

Technologies

ETAP
WinIGS
IEEE 80/998 standards

Benefits

Semi-annual profit-sharing bonus based on performance (10% to 20% of salary).
Medical, dental, and vision benefits.
401(k) plan with a 4% employer match and immediate vesting.
PTO that includes 80 hours of vacation, 40 hours of sick time per year, and 10 paid holidays.
Flexible work schedule with every other Friday off.
Career development opportunities including advancement possibilities and tuition reimbursement.
Gym membership stipend and wellness program participation.
Fertility benefits and pet insurance.

View full job page →

24d ago

OT & Defense Critical Infrastructure Cybersecurity Engineer

Booz Allen Hamilton Arlington, VA

Arlington, VA

24d ago

$113k - $257k/yr Full time Control Systems DCS Engineering

Apply Now

Job Description

OT and Defense Critical Infrastructure Cybersecurity Engineer role in Arlington, VA, onsite with Booz Allen Hamilton.

Responsibilities

Act as the principal technical authority on cybersecurity for Operational Technology and Defense Critical Infrastructure systems.
Provide expert guidance on securing industrial control systems, SCADA environments, and mission-critical defense assets.
Advise leadership and engineering teams on compliance, risk management, and advanced threat mitigation strategies.
Maintain awareness of evolving OT-focused cyber threats, attack techniques, and adversary capabilities.
Lead technical and strategic initiatives to ensure resilience and security of defense-critical operations.

Requirements

8+ years of experience in cybersecurity, information assurance, risk management, cyber operations, governance, or compliance
6+ years of experience securing OT, ICS, DCI, or SCADA systems
2+ years of experience leading teams
Experience developing Standard Operating Procedures or Incident Response playbooks
TS/SCI clearance
Bachelor's degree
Security+ certification

Benefits

Health benefits
Life insurance
Disability insurance
Financial benefits
Retirement benefits
Paid leave
Professional development
Tuition assistance
Work-life programs
Dependent care

Nice to have

Experience in ARNG, Army, or DoD environments
Ability to communicate technical issues or risks effectively to senior leadership
Master's degree
Advanced cybersecurity certifications such as CISSP, ISSAP, ISSEP, CASP+, or SecurityX

Work model

Remote: May require occasional in-person work at Booz Allen or customer facilities.
Hybrid: Regular presence at a Booz Allen facility with possible visits to customer sites as needed.
Onsite: Primarily performed at Booz Allen or customer facilities with on-site collaboration.

Clearance

Selected applicants will undergo a security investigation to determine eligibility for access to classified information
TS/SCI clearance is required

Compensation

Projected annual salary range: USD 112,800.00 – 257,000.00, depending on location, education, knowledge, skills, and experience
This posting will close within 90 days from the posting date

Identity verification

As part of the hiring process, Booz Allen may use identity verification that leverages biometrics and artificial intelligence. You may be required to be on camera during interviews and assessments, and Booz Allen may capture your image to verify identity and prevent fraud.

Candidate AI usage policy

AI tools are used in Booz Allen operations, but interview responses should reflect your own skills and knowledge unless explicit permission is granted to use AI assistance during the process.

Commitment to non-discrimination

All qualified applicants will receive consideration for employment without regard to disability, protected veteran status, or any other status protected by applicable law.

View full job page →

1mo ago

Protection and Automation Engineer

AZZO Pty Ltd Franklin, TN

Franklin, TN

1mo ago Closed

$100k - $135k/yr Full time Electrical Engineering Automation Electrical Design

This position is no longer accepting applications (closed Jul 26, 2026).

Job Description

AZZO Pty Ltd offers a flexible hybrid opportunity based in Franklin, TN, designed for engineers who deliver reliable protection, controls, and automation for energy operations. This role provides a competitive compensation package, comprehensive benefits, and a collaborative culture that supports professional growth and meaningful contributions to the sustainable energy transition. You will work with clients, vendors, and project teams to plan, test, and commission advanced control solutions.

Benefits

Competitive compensation package.
Medical, Dental, Vision and short-term insurance.
401(k) with company matching (cap applies) up to one year base salary.
20 days Paid Time Off per year, prorated for the calendar year.
11 paid US holidays.
Flexible working arrangements.
Opportunity to contribute to the sustainable energy transition.
Training and development programs for professional and personal growth.
Inclusive and collaborative working environment.

Responsibilities

Design, configure, test, and execute advanced PCA solutions tailored to customer needs.
Plan and execute Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), commissioning, and energisation activities for control, automation, and electrical systems.
Act as a key client-facing engineering representative during testing, commissioning, and project close-out activities.
Support EPMS, SCADA, PLC, and automation system integration through verification of communications, data mapping, and control functionality.

Requirements

Bachelor's degree in Mechatronics, Control Systems, Electrical Engineering, or related discipline.
3+ years of experience in Protection, Control, and Automation projects.
Experience with Schweitzer Engineering Labs (SEL), ABB and other PLC, SCADA, DCS, EPMS, or related industrial automation platforms.
Understanding of electrical protection systems, switchgear, RMUs, ATS, and associated control systems.
Strong attention to detail and willingness to learn.

Technologies

Technologies used in this role include Schweitzer Engineering Labs (SEL), ABB, PLC, SCADA, DCS, and EPMS.

Location & Travel

This is a Remote or Hybrid position based in Franklin, TN. Expected travel up to 45-65% for site visits to meet role requirements.

Compensation

Salary: USD 100,000 - 135,000 per year.

Application Question

Application question: Salary expectations for next role.

How to apply

For questions regarding the position or the recruitment process, contact People & Culture at peopleandculture@azzo.com.

View full job page →

1mo ago

Substation Physical and Protection and Controls Staff Engineer

Ampirical Fredericksburg, VA

Fredericksburg, VA

1mo ago Closed

$130k - $185k/yr Full time Senior AutoCAD Design Engineering

This position is no longer accepting applications (closed Jul 25, 2026).

Job Description

Ampirical is seeking a seasoned Substation Physical and Protection & Controls Staff Engineer to lead the physical design and relay protection packages for substations ranging from 69 kV to 500 kV. This onsite role in Fredericksburg, VA combines field support, client and vendor coordination, and mentorship of junior engineers while guiding projects from initial concept through commissioning. A strong foundation in power systems, protection and control, and a Professional Engineer license is essential.

Responsibilities

Oversee the creation of substation electrical design packages, including general arrangement, equipment layout, grounding, conduit, bus schemes, shielding, and lighting.
Conduct quality assurance reviews of physical design packages to ensure alignment with industry and client standards.
Develop scopes of work, cost estimates, and bid-ready construction drawing packages.
Support field teams during construction and evaluate submittals for design consistency.
Coordinate with clients, vendors, and internal teams to ensure project alignment and constructability.
Determine suitable protection and control architectures for transmission and distribution substations in the 69 kV–500 kV range.
Specify appropriate protection devices for substation equipment.
Verify relay protection drawing packages, including wiring diagrams, schematics, protection panels, and one-line and three-line diagrams.
Assist with and review load calculations for panels, battery systems, voltage drop, and other substation components.
Aid substation field personnel and perform field pre-inspections for turnkey projects involving protection panels, breakers, transformers, SCADA, and related equipment.
Ensure compliance with customer standards and industry regulations related to relay protection.
Serve as Engineer of Record and provide backup support to design supervisors as needed.
Mentor junior engineers and conduct technical training sessions.
May oversee proposal development, bid preparation, and project scheduling for assigned substation projects.
Represent Ampirical at technical conferences and industry committees, including IEEE.

Requirements

Bachelor’s Degree in Electrical Engineering from an ABET-accredited university, with preferred emphasis in Power Systems.
10 years of experience with a Professional Engineer (PE) license required; or 12+ years of experience without a PE.
10+ years of experience in substation design, covering both physical and protection & control disciplines.
Strong knowledge of SCADA, automation, settings, configuration, testing, commissioning, and protection & control engineering concepts.
Familiarity with NERC/FERC, IEEE standards, and tools such as ETAP, WinIGS, and IEEE 80/998.
Experience with AutoCAD, Inventor, and Bentley MicroStation or substation software is a plus.
Proven industry involvement (e.g., IEEE committees, conference presentations).
Engineering supervisory experience is preferred.
Ability to travel to meet with clients and attend technical conferences.

Technologies

ETAP
WinIGS
AutoCAD
Inventor
Bentley MicroStation
Substation software

Benefits

Medical, dental, and vision insurance with Day-One eligibility
401(k) with 4% employer match and immediate vesting
Semi-annual profit-sharing bonus (10%–20% of salary)
PTO: 80 hours vacation, 40 hours sick time per year, plus 10 paid holidays
Flexible work schedule with every other Friday off
Tuition reimbursement and ongoing career development opportunities
Gym membership stipend and wellness program
Fertility benefits and pet insurance

About Ampirical

Ampirical is dedicated to advancing the power grid with precision, innovation, and purpose. Guided by the idea that practical engineering drives reliable energy, the company emphasizes quality, forward-thinking solutions, and opportunities for engineers to grow and thrive within a collaborative environment. The organization values hands-on impact and professional development as core aspects of its culture.

Why Ampirical

Salary range: USD 130,000 – 185,000 per year, commensurate with experience
Semi-annual profit-sharing bonus based on performance (10%–20% of salary)
Day-One medical, dental, and vision benefits
401(k) with 4% employer match and immediate vesting
PTO starting at 80 hours vacation and 40 hours sick time, plus 10 holidays
Flexible schedule with every other Friday off
Tuition reimbursement and ongoing career development
Gym membership stipend and wellness program
Fertility benefits and pet insurance

View full job page →

1mo ago

Substation Protection & Control Engineer 2

GAI Consultants Inc Lisle, IL

Lisle, IL

1mo ago Closed

Full time Electrical Engineering AutoCAD Automation

This position is no longer accepting applications (closed Jul 14, 2026).

Job Description

GAI Consultants offers a client-first environment with opportunities to lead protection and control work on substations up to 500 kV. This onsite role in Lisle, IL emphasizes mentoring staff, rigorous QA/QC, and collaborative project delivery across substation initiatives.

Benefits

Competitive salary - GAI is committed to paying market-based salaries
Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire)
New paid Maternity/Paternity/Adoption program
Generous Paid Time Off and 7 paid holidays
401k company match
Tuition Reimbursement

Responsibilities

Lead design efforts and QA/QC checks for technical activities, including development and revision of one-lines, physical layouts, grounding, schematics and wiring, control and relaying panels, and coordination with CAD operators to produce high-quality CAD drawings
Integrate protection and control drawings with the physical layout and overall substation design
Design interfaces with SCADA systems and communications, including RTUs, HMIs, and IEDs
Develop control and relay panel layouts and assemble the associated specifications
Establish project criteria and contribute to design specifications and the overall bill of materials
Design and size auxiliary systems such as AC/DC load centers, batteries, and chargers
Design and size conduit, cable, and backup generators; manage long-lead item material orders
Perform Point to Point checks and ensure documentation accuracy
Review junior engineers’ designs to ensure alignment with client standards, identify gaps, and address protection-related issues
Document QA/QC reviews, maintain records, and communicate findings to the team
Travel to other offices and meet with clients; participate in project-specific meetings regularly
Manage tasks across multiple projects while upholding GAI’s project management standards
Develop scope of services and cost estimates for Substation and Protection & Control projects
Balance competing priorities with sound engineering and financial judgment to determine optimal solutions
Adapt to shifting deadlines and scope changes, mitigating barriers without schedule impact
Manage and prioritize multiple projects concurrently and perform effectively under deadlines and unforeseen developments
Be prepared to work extended hours or after hours when required

Requirements

6+ years of relevant experience
Bachelor of Science or Master of Science in Engineering
Professional Engineer (P.E.) License

Technologies

CAD
SCADA systems
RTUs
HMIs
IEDs

Education

Bachelors or better in Engineering or related field

Licenses & Certifications

Professional Engineer

View full job page →

1mo ago

Lead Engineer - Protection and Control

Iberdrola Group Augusta, ME

Augusta, ME

1mo ago Closed

$111k - $146k/yr Full time Electrical Engineering Electrical Design Engineering

This position is no longer accepting applications (closed Jul 13, 2026).

Job Description

An experienced protection and control engineer will lead Iberdrola Group's protection platforms across AVANGRID's Maine and New York operations. This onsite role in Augusta, Maine, oversees the Protection Engineering group and guides the full spectrum of studies, settings, testing, and commissioning to sustain reliable electric delivery across a sizable transmission and substation footprint. The position carries a salary range of USD 111,332 to 145,800 per year and requires at least a bachelor’s degree in Electrical Engineering or Electrical Engineering Technology along with seven or more years of relevant experience.

Responsibilities

Lead the design, estimation, and analysis of transmission and substation protection systems in support of the capital construction budget and overall performance goals (20%).
Own protection system platforms, including settings, testing, and commissioning, developed in-house or by contractors and consultants (25%).
Oversee engineering studies to assess equipment and protection performance, analyze operational issues, and support reliability and efficiency improvements.
Develop and validate data for engineering analyses and apply sound engineering judgment to solve complex technical problems.
Provide expertise in analyzing transmission fault events to ensure protection schemes operate as intended.
Deliver clear fault analysis reports to management, detailing corrective actions and lessons learned as needed.
Represent the company on regional and national committees.
Lead and guide the technical development of the Protection Engineering group.
Act as the primary protection engineering expert within the USA organization, offering high-level consultation on complex problems and on emerging technological, regulatory, or political issues.
Collaborate across Operating Companies, global affiliates, and internal and external departments.
Leverage knowledge to influence and guide department engineers.
Provide technical leadership on complex projects with broad departmental impact.
Mentor and develop the team to enhance technical skills.
Collaborate effectively across departments and liaise with contractors on policy, standards, and best practices.
Operate independently with limited supervision.

Required Qualifications

Bachelor of Science in Electrical Engineering or Electrical Engineering Technology.
Master’s degree preferred.
Professional engineering license preferred.
Minimum of 7+ years of technical experience in protection engineering or a related field.
Expert knowledge of all aspects of engineering and design, national and international standards, and compliance requirements associated with power system protection.

Technical Skills and Competencies

Theoretical engineering expertise spanning planning, operations, design, analytics, modeling, and calculations, with a broad view of the business landscape.
Practical engineering experience in planning, design, construction, field work, standardization, economic analyses, and developing business cases.
Proficiency in documenting and interpreting engineering information and ensuring alignment with standards and contract requirements.
Ability to review and approve engineering work to ensure compliance with company standards, specifications, and contracts.
Knowledge of the regulatory and compliance environment at local, state, and federal levels.

Preferred Qualifications

Independent decision-making capability and self-direction.
Strong diagnostic and problem-solving skills for complex technical and analytical challenges.
Effective communication and interpersonal abilities to convey technical concepts clearly.
Leadership skills to drive adoption of new technologies across operating companies and international affiliates.
Expertise in complex protection coordination analysis.
Project management capabilities.
Awareness of commercial implications, including cost estimating, budgeting, and least-cost planning.
Safety leadership demonstrated through adherence to regulations in process and procedural development.
Comprehensive expertise in power engineering theory, application, standards, design, testing, commissioning, and analysis.

Competencies

Growth & Continuous Improvement
Initiative & Change
Focus on Results
Customer Centric
Communication
Collaboration
Leadership

Benefits

Competitive benefits package
Sign-on bonus
Relocation assistance

Location and Work Type

Location: Augusta, Maine (onsite). Work type: Office-based role.

Compensation

Salary range: USD 111,332 to 145,800 per year.

Education and Experience Summary

Education: Bachelor of Science in Electrical Engineering or Electrical Engineering Technology. Experience: Minimum 7 years of technical experience in protection engineering or related field. Master’s degree and professional engineering license are preferred.

Mobility and Eligibility

Mobility information: Applicants who are not citizens of the country of the vacancy will be subject to applicable immigration requirements to legally work in that country.

Application Deadline

Application deadline: August 31, 2026.

View full job page →

2mo ago

Engineer II - Protection & Control

Qualus Westborough, MA

Westborough, MA

2mo ago Closed

$78k - $110k/yr Full time Electrical Engineering AutoCAD Controls

Protection and Control Engineer Jobs

Get Protection and Control Engineer Jobs alerts