Hardware Engineering

Hardware Engineering Jobs

150 jobs found

Today

FPGA Engineer

iTechStack Inc. Houston, TX

Houston, TX

Today

$85k - $87k/yr Full time Electrical Engineering Design Design Engineering

Apply Now

Job Description

The FPGA Engineer will design and verify VHDL based FPGA designs, perform functional and timing verifications, conduct HIL testing, and develop interfaces and memory architectures for iTechStack Inc. in Houston, TX (onsite).

Responsibilities

Develop and verify VHDL-based FPGA designs.
Perform functional, timing, post-synthesis, and post-layout verification.
Conduct Hardware-in-the-Loop (HIL) testing and hardware validation.
Develop communication interfaces and memory architectures.
Support product validation, documentation, and compliance activities.

Requirements

B.E./M.Tech in Electrical, Electronics, or Instrumentation Engineering.
3+ years of FPGA development experience.
Strong expertise in VHDL.
Hands-on experience with Xilinx Vivado, Intel Quartus, Lattice FPGA, or Microchip Libero.
Experience with FPGA verification, HIL testing, and hardware debugging.
Knowledge of DDR3/DDR4, ADC/DAC, JESD204B, LVDS, ECC.
Experience with Modbus, CAN, Ethernet/IP protocols.
Oil & Gas, Industrial Automation, or Embedded Systems experience is preferred.

Technologies

VHDL
Xilinx Vivado
Intel Quartus
Lattice FPGA
Microchip Libero
DDR3
DDR4
JESD204B
LVDS
ECC
Modbus
CAN
Ethernet/IP
HIL

Pay

Salary: USD 85,000 - 87,000 per year

Location

Houston, TX (onsite)

Application Questions

Do you have FPGA verification, HIL testing, and hardware debugging experience
Do you have experience with Xilinx Vivado, Intel Quartus, Lattice FPGA, or Microchip Libero
Do you have Oil and Gas or refinery monitoring systems experience

View full job page →

Today

Principal RF Design Engineer

Raytheon Marlborough, MA

Marlborough, MA

Today

$108k - $205k/yr Full time Electrical Engineering Senior Analog Design

Apply Now

Job Description

Raytheon seeks a Principal RF Design Engineer to lead the design and development of RF transmitters, receivers, or exciters for radar systems. The role integrates RF circuit design, simulation, and production support to ensure reliable hardware from development through production. This 1st shift position is 100 percent on-site and based in Marlborough, MA or Tewksbury, MA.

Responsibilities

Design and development of transmitters, receivers, or exciters.
Design and optimization of RF circuits, including chains of components (receiver, exciter, etc.) or individual parts such as filters, limiters, and couplers.
Collaborate with interdisciplinary teams including power, digital, and mechanical engineering.
Schematic capture and RF routing.
Provide technical support during transition to production and support production activities.
Position is a first shift, on-site role based in Marlborough, MA or Tewksbury, MA.

Requirements

A degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of relevant experience.
Experience with microwave and RF system, subsystem, and/or component analysis, design and/or test.
Experience with electromagnetic simulation tools such as HFSS, ADS, CST, and Mentor Graphics Xpedition, as well as analytical tools like MATLAB.
Ability to obtain and maintain a U.S. government issued Secret security clearance; U.S. citizenship is required for clearance eligibility.

Technologies

HFSS
ADS
CST
Mentor Graphics Xpedition
MATLAB

Compensation

Salary range is USD 107,500 to 204,500 per year.

Benefits

Relocation assistance based on candidate eligibility
Medical insurance
Dental insurance
Vision insurance
Life insurance
Short-term disability
Long-term disability
401(k) match
Flexible spending accounts
Flexible work schedules
Employee Assistance Program
Employee Scholar Program
Parental leave
Paid time off
Holidays
Annual short-term and long-term incentive programs

What We Offer

RTX values guide actions, behaviors, and performance with a vision of a safer, more connected world. Core values include Safety, Trust, Respect, Accountability, Collaboration, and Innovation. This position also offers relocation support based on candidate eligibility.

Learn More and Apply Now

Onsite: Employees in Onsite roles will work primarily on site.

Clearance Information: This position requires a security clearance. The clearance process is handled by the DCSA Consolidated Adjudication Services (DCSA CAS). More information about security clearances is available at the U.S. Department of State website.

Privacy Policy and Terms

Click on this link to read the Policy and Terms

View full job page →

Today

Principal Engineer Electronics

Northrop Grumman Oklahoma City, OK

Oklahoma City, OK

Today

$93k - $140k/yr Full time Electrical Engineering Senior Avionics

Apply Now

Job Description

This onsite position in Oklahoma City at Northrop Grumman focuses on leading hardware aspects of the radar avionics subsystem program, performing supplier and subcontract management activities within the program. The role offers a salary range of USD 93,300 to 139,900 per year.

Responsibilities

Execute the Statement of Work as a Supplier/Subcontract Manager for Radar Avionics Subsystems.
Manage program requirements to ensure supplier compliance with program objectives, avionics design standards, test plans, documentation, and hardware requirements.
Document designs using detailed schematics, diagrams, and specifications.
Collaborate with Subcontract engineers and stakeholders to implement subsystem performance and environmental requirements.
Develop design solutions for obsolete hardware.
Travel up to 25 percent.

Requirements

Bachelor of Science in a STEM discipline with 4 years of related engineering experience, or a Master’s Degree in a STEM discipline with 2 years of related engineering experience.
Experience designing, configuring, and installing avionics subsystems.
Active DoD Secret clearance.
Ability to obtain and maintain Special Program Access (SAP) within a timeframe determined by the company to meet its business needs.

Benefits

Health insurance coverage
Life and disability insurance
Savings plan
Company paid holidays
Paid time off for vacation and/or personal business
Long Term Incentives (for VP/Director positions)

Description

Northrop Grumman's Aeronautics Systems sector is seeking a Principal Engineer Electronics. This onsite position is located in Oklahoma City, OK.

The Principal Engineer Electronics will be responsible for developing and executing the radar avionics subsystem program, coordinating with suppliers and engineering teams to satisfy design, test, and environmental requirements.

This role emphasizes collaboration with subcontract engineers and stakeholders, with a focus on advancing subsystem performance while addressing obsolete hardware and related design challenges.

View full job page →

1d ago

Lead Engineer – PWB Layout and Electronic Design Engineer

GE Aerospace Grand Rapids, MI

Grand Rapids, MI

1d ago

$95k - $159k/yr Full time Electrical Engineering Altium Designer Avionics

Apply Now

Job Description

GE Aerospace in Grand Rapids, MI offers a hybrid work model and a comprehensive benefits package designed to support you across health, retirement, and work-life needs. The role focuses on placing and routing highly complex printed circuit boards for avionics products while supporting circuit card assembly development for avionics equipment. The position comes with a competitive salary range of USD 95,000 to 159,000 per year, relocation support where needed, and structured opportunities for professional growth within a collaborative, results oriented environment.

Responsibilities

Collaborate with design team members including Circuit Design Engineers, Materials Scientists, Manufacturing Engineers and PWB Suppliers to align on layouts and feasibility
Design high density, high speed printed wiring boards for avionics applications
Apply experience with Siemens Mentor Expedition, Altium Designer or Cadence Allegro to develop layouts
Define PWB stack ups and via structures that meet design requirements and align with supplier capabilities
Create PWB parts, set layout constraints, perform parts placement, complete routing, and produce fabrication drawings and manufacturing data packages
Maintain and improve Design for Manufacturing and enforce Design rule checks
Select components and perform circuit design and schematic capture using Siemens Mentor Expedition, Altium Designer and Cadence Allegro
Conduct electronic testing in the lab, including board bring up, multi card integration testing and pre qualification testing
Develop requirements and conduct requirements reviews
Perform design analysis for circuit performance with LTSPICE and conduct stress and derating analyses for components used in designs

Requirements

Bachelor's degree in Electrical Engineering or equivalent experience
Minimum of 5 years of combined professional experience in PWB layout and circuit design using Siemens/Mentor Expedition, Altium Designer or Cadence Allegro
Knowledge of PWB design and fabrication processes
U.S. citizenship is required for this position

Technologies

Siemens/Mentor Expedition
Altium Designer
Cadence Allegro
LTSPICE
OrCAD PSpice
Mentor Graphics Expedition Enterprise
Hyperlinx PI/SI
Microsoft Office and Visio
HDI technologies including micro vias, buried and blind vias, back drilling
VPX, CAN, MIL-STD-1553, ARINC 429, ARINC 664

Benefits

Medical, dental, vision and prescription drug coverage
Health coaching and Employee Assistance Program
GE Aerospace Retirement Savings Plan with company matching contributions
Fidelity resources and planning consultants
Tuition assistance and adoption support
Paid parental leave and disability insurance
Life insurance and paid time off for vacation or illness
Relocation assistance

Additional information

GE Aerospace emphasizes a strong work environment, ongoing professional development, challenging career opportunities, and competitive compensation. The role sits at the intersection of advanced design and practical manufacturing, offering the chance to contribute to avionics hardware that meets rigorous industry standards.

View full job page →

1d ago

RF Antenna and Radome Engineer II

Raytheon Tucson, AZ

Tucson, AZ

1d ago

$69k - $131k/yr Full time Electrical Engineering Antenna Analysis Design Engineering

Apply Now

Job Description

_raytheon is seeking an RF Antenna and Radome Engineer II to join its Effector RF Design Department in Tucson, AZ. This onsite role focuses on antenna and radome hardware development, modeling and simulation, and interpretation of test data, working with cross-functional teams to meet rigorous performance requirements. The position blends hands-on design with analysis, requiring collaboration with thermal, structural, mechanical, and systems engineers as well as antenna manufacturing suppliers._

Responsibilities

Development of antenna or radome hardware and requirements.
Collaborate with interdisciplinary engineering teams including thermal, structural, mechanical, and systems engineering.
Engage with antenna manufacturing suppliers.
Conduct antenna modeling and simulation on workstations and high performance computing resources.
Interpret simulation or measurement test data to verify performance against requirements.

Requirements

Master’s degree in Electrical Engineering or Computer Engineering or related STEM field.
Experience and/or coursework with RF and electromagnetic theory.
Proficiency with modeling and simulation tools such as HFSS, CST, FEKO, SENTRi and/or GRASP.

Technologies

HFSS
CST
FEKO
SENTRi
GRASP
Python
MATLAB

Location

United States, Tucson, AZ (onsite). Onsite role at 1151 E Hermans Rd, Building M02.

Salary

USD 68,900 - 131,100 per year.

Work Type

Onsite

Security Clearance

Active and transferable U.S. government issued security clearance required prior to start date.
U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
DoD Clearance: Secret; Interim clearance required prior to start date.

Benefits

RTX values guide actions, behaviors, and performance with a vision for a safer, more connected world. The company emphasizes Trust, Respect, Accountability, Collaboration, and Innovation, and offers relocation eligibility for eligible candidates.

View full job page →

2d ago

SkillBridge - Principal or Sr. Principal Electronics Engineer

Northrop Grumman Oklahoma City, OK

Oklahoma City, OK

2d ago

$93k - $175k/yr Full time Electrical Engineering Senior Avionics

Apply Now

Job Description

Northrop Grumman seeks a Principal Electronics Engineer (level 3) or Sr. Principal Electronics Engineer (level 4) to participate on-site in Oklahoma City under the SkillBridge program.

Responsibilities

Research, design, develop, integrate, and test electronic equipment across domains such as power generation, communications, flight controls, networks, radar, navigation, and weapons systems.
Maintain complex circuitry components including analog/digital hardware, LRUs and SRUs.
Report technical status, challenges, impacts, and mitigations to Chief Engineers, EI&E Directors, and Program Management across the project portfolio.
Serve as Responsible Engineer, supplier technical interface, and focal Avionics representative for integration support.
Oversee and mentor responsible and lower-level engineers to achieve technical performance objectives.
Monitor activities across contracts to ensure development, sustainment, hardware design, and qualification activities align with program goals; support cross-functional teams during integration and verification/validation.
Provide technical status and assessments to program leadership and customers.
Assist with evaluating cost and schedule impacts of technical decisions.
Ensure adherence to processes, best practices, quality standards, and policies for internal and external deliverables.
Coordinate with engineering and program management to ensure execution of the statement of work and technical program requirements.
Collaborate with the Technical Review Board on upcoming and current change packages.
Support technical interchange meetings and program reviews; help resolve engineering challenges.
Coordinate across programs and functions to drive common efficiencies and operational gains.
Analyze complex problems and develop robust solutions.

Technologies

LabVIEW

Benefits

Relocation assistance (may be available)
Health insurance coverage
Life and disability insurance
Savings plan
Company paid holidays
Paid time off (PTO) for vacation and/or personal business
Annual bonuses
Long Term Incentives

Description

Northrop Grumman offers opportunities to work on revolutionary systems with global impact, built on a long history of technological leadership in aerospace and defense. The role seeks bold ideas and a pioneering mindset to advance critical avionics initiatives within the Air Dominance Division.

SkillBridge Eligibility

Has served at least 180 days on active duty
Is within 12 months of separation or retirement
Will receive an honorable discharge
Has taken any service TAPS/TGPS
Has attended or participated in an ethics brief within the last 12 months
Has received Unit Commander written authorization and approval to participate in the SkillBridge Program prior to internship start

Requirements

Education: PhD in STEM discipline (Science, Technology, Engineering or Mathematics)
Minimum experience: 1 year
Location: Oklahoma City, OK (onsite)

Before Applying

Important – Please complete SkillBridge Prescreen by Joining the Military / Veteran Talent Network

View full job page →

2d ago

Advanced ASIC FPGA Engineer

General Dynamics Mission Systems, Inc Pittsfield, MA

Pittsfield, MA

2d ago

$129k - $143k/yr Full time Electrical Engineering Asic Circuit Design

Apply Now

Job Description

General Dynamics Mission Systems is seeking an Advanced ASIC/FPGA Design Engineer to drive digital design efforts, guiding work from VHDL-based FPGA implementations through ASIC conversions. This on-site role in Pittsfield, Massachusetts involves mentoring engineers, coordinating with packaging on FPGA-to-ASIC transitions, and contributing to major defense-focused programs. The position may require up to 10% travel and the ability to obtain a DoD security clearance within 18 months.

Responsibilities

Define, design, verify, and document ASIC and FPGA projects throughout the development lifecycle
Determine architecture and system-level simulation strategies with emphasis on VHDL-based digital design
Specify module interfaces and all aspects of device design and verification
Assess the design flow, including high level design, synthesis, place-and-route, timing, and power considerations
Develop test and simulation plans that establish functional criteria
Verify test results and analyze performance data
Review vendor capabilities, foundry technologies, device libraries, and simulation tools
Participate in improving ASIC/FPGA organizational processes
Support the generation of technical engineering artifacts using appropriate standards, processes, procedures, and tools
Analyze customer design proposals and manuals to determine feasibility of design or application
Select components and equipment based on specifications and reliability
Conduct hardware integration and testing with lab equipment such as oscilloscopes, logic analyzers, and JTAG debuggers
Collaborate with the ASIC packaging team to execute FPGA-to-ASIC conversions
Mentor engineers on FPGA-to-ASIC conversion methodologies and best practices
Contribute to the completion of major programs and projects
Support program execution with awareness of scope, schedule, and cost objectives
Plan and execute project tasks for the activities described above

Requirements

Strong proficiency in VHDL for digital design and simulation
Hands-on experience with Microsemi and/or Xilinx FPGA development
Proficiency with Vivado, Libero, Mentor, and/or Cadence EDA tools
Hardware integration experience with lab tools such as oscilloscopes, logic analyzers, and JTAG debuggers
Ability to mentor others through technical processes
Ability to obtain a DoD Security Clearance within 18 months
Bachelor's degree in Electrical or Computer Engineering, or related field, plus at least 5 years of relevant experience; or Master's degree plus at least 3 years of relevant experience