PLC Programming

PLC Programming Engineer Jobs

11 jobs found

18d ago

Electrical Controls Design Engineer

Nammo Defense Systems, Inc Perry, FL

Perry, FL

18d ago

Full time Electrical Engineering Arc Flash Analysis AutoCAD

Apply Now

Job Description

In Perry, Florida, this on-site role focuses on designing, developing, and refining electrical control systems for Nammo Perry's munitions production and testing operations. The engineer will collaborate with design engineers and electrical controls engineers to ensure that equipment meets technical requirements and adheres to safety and regulatory standards throughout the production lifecycle.

Responsibilities

Design, Develop, and Layout all Electrical Panels for new and existing equipment.
Specify all components used in electrical panels and assure those components meet all safety and electrical requirements.
Document all new and existing equipment panel layouts, electrical schematics, and pneumatic schematics utilizing AutoCAD Electrical 2024.
Experience in Arc-flash hazard analysis / calculations.
Experience in designing and specifying the electrical panels and components that meet hazardous location wiring codes.
Ensure that equipment is installed and maintained in conformance with current codes and regulations.
Recommend improvements to new and existing equipment to optimize the production process and determine corrective actions.
Serve as primary point of contact for all electrical controls related troubleshooting.
Determine preventative maintenance actions and provide supporting documentation to maintenance.
Collaborate with the maintenance and operational groups on preventative maintenance, machine repair, predictive maintenance, equipment performance, and design improvements.
Maintain good employee relations, and adhere to our Affirmative Action Plan, Labor laws and EEOC rules and regulations.
Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices.
Other duties as assigned.

Requirements

Bachelor's degree in electrical engineering or combination of education and 5 years work experience.
At least 3 years of experience in a manufacturing environment providing technical support to fully automated, semi-automated and manual processes.
Familiar with PLC/HMI programming (Preferably Emerson PAC Machine Edition Version 10).
Strong fundamental knowledge of control and electrical system design and its application in automated industrial designs including specification of vision, power, sensor, inspection, and communications systems.
Proficient in AutoCAD Electrical Version 2024.
Proficient with MS Office Suite.
Familiar with Cognex vision cameras.
Ability to create and troubleshoot electrical and pneumatic schematics.
Ability to program and troubleshoot VFDs, servo actuators and robots.
Ability to read and follow mechanical drawings.
Ability to balance multiple projects at one time.
Familiarity with Statistical Process Control (SPC) within an industrial environment.
Familiarity with Process Safety Management (PSM) plans or equivalent.
Self-starter, ability to work independently and handle multiple projects timely and efficiently; meeting specified deadlines.
Good communication skills, both oral and written.

Technologies

AutoCAD Electrical 2024
Emerson PAC Machine Edition Version 10
Cognex vision cameras
MS Office Suite

Benefits

Monday - Thursday work week with 10-hour days
Relocation assistance provided
401(K) with a 6% company match
100% Employer-Paid Employee Only Medical Plan Option
Employer Health Saving Account Contributions
Generous Time Off benefits

Working Conditions and Requirements

Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy which includes random testing.
Must have good vision (may be corrected).
Must be able to communicate written and verbally.
Must be able to stand/walk/sit for prolonged periods of time.
Must be able to travel.
Must have stamina to work more than the scheduled workday when needed, including nights and weekends.
Must be able to lift up to 20 lbs.
Must be physically present during business hours.

View full job page →

18d ago

Senior Electrical Engineer

Wausau Equipment Company (aka Alamo Group Snow &...) Fond du Lac, WI

Fond du Lac, WI

18d ago

$1 - $1/hr Full time Electrical Engineering Senior AutoCAD

Apply Now

Job Description

Senior Electrical Engineer leading cross functional projects to ensure safety, design quality, cost targets, and on schedule delivery.

Responsibilities

Lead product development with the cross functional team to translate the product roadmap into new offerings, utilizing up to date materials, processes, and technology.
Create and consolidate detailed specifications for new products.
Partner with marketing to drive voice of customer initiatives and participate in VOC sessions.
Define product requirements based on VOC findings, specifications, and regulatory considerations.
Conduct product testing to verify conformance to specifications and design intent.
Champion adherence to engineering processes and ISO standards across projects.
Collaborate with operations and suppliers to reduce cost, improve quality, and optimize scheduling.
Coordinate with service teams to resolve high priority product issues promptly.
Travel to customer sites for on site diagnostics when needed.
Support marketing efforts by representing the company at tradeshows, conferences, product launches, and training events.
Align with the engineering product development vision, strategy, and plan.
Support sustaining engineering to minimize product issues, warranty exposure, and rework.
Deliver innovative designs that balance performance with cost effective manufacturability.
Foster a culture of continuous improvement to achieve design excellence.
Travel up to 20 percent, mainly domestic, during product introduction phases.

Requirements

Knowledge of harness design, electrical schematics, and DC circuit analysis with troubleshooting for 12 and 24 VDC systems; familiarity with low to medium voltage AC distribution and controls.
Proficiency in PLC programming (CodeSYS, IQAN).
Strong computer skills including Excel and Word.
Experience with CAD tools such as SolidWorks, SolidWorks Electrical, and AutoCAD.
Background in engine diagnostics with general understanding of drivetrain, driveline, and diesel engines.
Solid technical foundation in electrical engineering.
Basic knowledge of hydraulic and pneumatic controls.
High accountability for project commitments and business objectives.
Effective written and oral communication across all levels and with external representatives; strong interpersonal skills.
Ability to explain technical topics to diverse audiences.
Track record of delivering on commitments on time and with quality.
Familiarity with ERP/MRP systems, preferably JD Edwards.
Ability to thrive in a fast paced environment with a strong sense of urgency.

Technologies

CodeSYS
IQAN
SolidWorks
SolidWorks Electrical
AutoCAD
Excel
Word
JD Edwards

Education and Experience

Bachelor of Science in Electrical Engineering or a related field is required.
At least seven years of engineering experience in a manufacturing setting focused on heavy equipment, engine powertrains, and driveline components, with a proven project execution record.
Experience with mobile equipment in snow removal, construction, or agricultural sectors is preferred.

Location: Fond du Lac, WI (onsite)

Salary: USD 1 - 1 per hourly

View full job page →

20d ago

Automation Design Engineer

Piezo Technologies Indianapolis, IN

Indianapolis, IN

20d ago

$110k+/yr Full time Electrical Engineering AutoCAD Automation

Apply Now

Job Description

Piezo Technologies is seeking an experienced Automation Design Engineer to own the full lifecycle of automated manufacturing equipment, from concept through production. This onsite role in Indianapolis, IN combines hands-on design, build, debugging, and commissioning to boost capacity, improve quality, reduce costs, and ensure safe operation on the factory floor. The position offers a compensation package of USD 110,000 per year and requires a strong background in electrical and mechanical engineering, automation, and mechatronics to deliver robust, production-ready systems.

Responsibilities

Architect, physically assemble, debug, and deploy automated manufacturing equipment, including assembly lines, material handling systems, fixtures, and end-of-line test devices.
Perform mechanical assembly and system integration across subsystems.
Support electrical panel fabrication, verify wiring, and conduct I/O checkout.
Install sensors, actuators, robotics, and pneumatic components.
Bring systems up, execute power-on testing, and perform on-machine debugging.
Develop PLC logic and HMI interfaces.
Program robots to meet production requirements.
Utilize Python-based software for automation support, test systems, data collection, analysis, or manufacturing utilities.
Build, integrate, and commission robotic and pneumatic subsystems, including end-of-arm tooling, cylinders, valves, regulators, and air logic.
Design and implement automated assembly and material handling systems with reliable handoffs, part tracking, and system robustness.
Lead commissioning, debugging, and validation from prototype through full production ramp.
Own automation projects from concept through FAT, SAT, installation, validation, and sustained production support.
Support manufacturing by troubleshooting live production automation equipment to minimize downtime and improve OEE.
Implement poka-yoke, in-process inspection, and automated quality controls.
Conduct root cause analysis of equipment failures and implement permanent corrective actions.
Collaborate with Manufacturing Engineering to optimize process flow, ergonomics, cycle time, and line balance.
Support equipment upgrades, retrofits, and obsolescence mitigation.
Develop standard work, maintenance documentation, and training materials for production support teams.
Manage automation-related capital projects, including vendor coordination and FAT/SAT activities, while maintaining hands-on technical ownership.
Ensure automation systems comply with applicable safety standards and regulatory requirements.
Maintain complete engineering documentation including schematics, software revisions, and change control.
Provide technical guidance to automation technicians and manufacturing support staff.
Drive continuous improvement initiatives focused on cost, quality, throughput, and safety.
Perform other duties as assigned.

Requirements

5–8+ years of hands-on experience building automated manufacturing equipment.
Proven experience constructing automated assembly and material handling systems.
Direct, hands-on experience with industrial robotics and pneumatic systems (cylinders, valves, regulators, air logic, tooling).
Hands-on experience supporting automation in a production environment with uptime and throughput accountability.
Experience in regulated or high-reliability industries (medical, aerospace, defense, automotive, oil & gas, or industrial manufacturing) is preferred.
This role involves access to ITAR-controlled information; must be a U.S. Person or Protected Individual as defined by ITAR.
Strong hands-on experience with PLCs, HMIs, motion control, robotics, sensors, actuators, and industrial networks.
Python software experience required, applied to automation, test systems, data collection, or manufacturing support tools.
Proven ability to debug electro-mechanical automation equipment on the shop floor.
Experience designing and integrating robotic systems with pneumatic tooling.
Ability to read, create, and debug electrical schematics and mechanical drawings.
Experience with industrial test equipment and in-process / end-of-line testing.
Programming experience with PLC languages and automation software platforms.
CAD experience (electrical and/or mechanical) is beneficial.
Strong problem-solving, organizational, and documentation skills.
Excellent verbal and written communication skills.

Technologies

Python
PLC languages
HMI interfaces
Robot programming
CAD (electrical/mechanical)
Industrial networks
Motion control

Environmental & Physical Requirements

Manufacturing / Non-Sedentary: Work may occur in an office or warehouse environment; expect to spend 66%+ of the workday standing, walking, bending, stooping, or climbing.
Potential exposure to dust; the role may require lifting and/or pushing up to 50 pounds about one-third to two-thirds of the time.

Additional Information

Job duties may include additional responsibilities as assigned by a supervisor or manager. This description outlines the general nature and level of work; it is not intended to be exhaustive. Piezo Technologies reserves the right to modify job responsibilities, reassign or transfer positions at any time without notice.

View full job page →

23d ago

Electrical Engineer specializing in UL 508A design

Telemetry & Process Controls Saint Paul, MN

Saint Paul, MN

23d ago

$95k - $150k/yr Full time Electrical Engineering AutoCAD AutoCAD Electrical

Apply Now

Job Description

Telemetry & Process Controls is seeking an Electrical Engineer who specializes in UL 508A design to lead the engineering, layout, and compliance of industrial control panels built in a certified shop. The role centers on ensuring panel assemblies meet UL 508A and NEC requirements, while supporting production on a hybrid schedule based in Saint Paul, Minnesota.

Responsibilities

Develop detailed electrical schematics, wiring diagrams, and panel layouts using CAD tools such as AutoCAD Electrical, EPLAN, or similar software.
Maintain strict compliance with UL 508A standards for component spacing, wire sizing, and grounding to mitigate electrical hazards.
Choose and source UL-listed or UL-recognized components, including PLCs, VFDs, motor starters, relays, and circuit breakers, ensuring appropriate voltage and environmental ratings.
Conduct engineering analyses such as Short-Circuit Current Rating (SCCR), power load, and thermal management studies to support safe, reliable designs.
Provide on-site technical guidance to panel builders to ensure assemblies align with engineering blueprints and preserve UL certification integrity.

Requirements

Bachelor’s degree in Electrical Engineering (BSEE) or a related technical field.
Strong knowledge of UL 508A, NEC (NFPA 70), and NFPA 79 (Electrical Standard for Industrial Machinery).
Proficiency in AutoCAD Electrical, SolidWorks Electrical, or EPLAN; familiarity with PLC programming (Rockwell/Allen-Bradley) is preferred.
Ability to calculate wire bending space, conduit fill, and power distribution architecture for low to medium voltage systems.
While not always required, a UL 508A Manufacturer Technical Representative (MTR) qualification or a Professional Engineer (PE) license is advantageous.

Technologies

AutoCAD Electrical
SolidWorks Electrical
EPLAN
Rockwell/Allen-Bradley PLC programming

Benefits

401(k)
401(k) matching
Health insurance
Health savings account
Paid time off

Salary

USD 95,000 - 150,000 per year

Work Location

Hybrid remote in Saint Paul, MN 55128

View full job page →

24d ago

Instrument & Electrical Engineer

Chang Chun Arizona LLC Casa Grande, AZ

Casa Grande, AZ

24d ago

Full time Electrical Engineering Senior AutoCAD Electrical

Apply Now

Job Description

Chang Chun Arizona LLC offers a benefits-forward, safety-first engineering environment with a hands-on, onsite Instrument & Electrical Engineer role in Casa Grande, AZ. You will lead the design, procurement, construction, and ongoing maintenance of instrument and electrical equipment and automation process control infrastructure at the site, collaborating across disciplines to keep projects on schedule and compliant.

Responsibilities

Confirm Basic Engineering Design Data (BEDD), including instrument data sheets and electrical equipment load lists.
From BEDD, request quotes and manage procurement of instrument and electrical equipment; conduct vendor Technical Bid Evaluations and Commercial Bid Evaluations, preparing technical clarifications and achieving manager approval for TBE and CBE.
Provide BEDD and vendor drawings to design teams to complete engineering work such as Single Line Diagram, Power Layout, Cable Schedule, and Instrument IO List.
Maintain version control of engineering drawings to ensure construction uses the latest revisions.
Code and program process control through DCS systems.
Track the manufacturing status of electrical and instrument equipment to align with the construction schedule.
Coordinate with logistics for storage management and equipment turnover to contractors.
Read and interpret engineering drawings to support quality assurance.
Conduct field observations and inspections to monitor performance, progress, and contractor quality; resolve design compliance issues with contractors.
Use measuring tools to verify construction conformance, including grounding tests, insulation tests, loop tests, and parameter settings.
Prepare construction reports to trace progress and status.
Lead start-up commissioning activities and supervise technicians with clear work assignments.
Coordinate with Process, Piping, Civil, Architecture, and Procurement interfaces to manage multidisciplinary collaboration.
Address daily instrument and electrical equipment issues, including adding devices, alterations, troubleshooting, repairs, automation programming, preventive maintenance, and spare parts management.
Identify critical instrument and electrical equipment and define preventive maintenance plans to support Mechanical Integrity (MI). Oversee maintenance to meet schedules and minimize downtime.
Interpret test results and implement corrective actions for instrument and electrical systems.
Review and update Work Instructions according to operating and maintenance requirements and technical data.
Perform Job Safety Analysis to identify hazards and establish control measures.
Collaborate with Production to meet quality and safety audit requirements from customers or regulatory bodies.
Serve as initial responder when production lines stop, ensuring on-site instrument and electrical support.
Apply root-cause analysis to troubleshoot issues and prioritize corrective actions to minimize downtime.
Complete SAP documentation and related paperwork; maintain equipment specifications for purchasing, installation, operation, and maintenance.
Conduct Kick Off Meetings with vendors and document Minutes of Meeting to clarify issues and track progress.

Requirements

Bachelor’s degree in Electrical Engineering from an accredited four-year college or university.
3 to 5 years of Electrical Engineering experience in a heavy manufacturing or chemical processing environment (including internships).
Practical knowledge of electrical equipment operation, troubleshooting, and repair for 12.47 kV medium voltage, 480 V low voltage systems, transformers, generators, DC chargers, MCCs, motors, and UPS systems.
Strong understanding of electrical safety practices.
Experience with instrumentation such as Flow, Level, Pressure, Thermal, pH, Conductivity transmitters.
Knowledge of process control systems including DCS and PLCs; automation programming experience preferred.
Team management experience preferred.
Willingness to work off shifts and overtime as needed; on-call during operation phase.
Proficiency with Microsoft Office (Outlook, Word, Excel, PowerPoint).
Excellent communication skills and ability to interact effectively across diverse teams.
Commitment to process safety, ergonomics, OSHA, environmental regulations, and applicable codes.
Ability to make decisions and recommendations with minimal supervision.

Technologies

DCS
PLC
Microsoft Office
SAP

Benefits

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Contingent Offer of Employment

Successful completion of a background check
Negative results on a drug screening
Verification of employment eligibility and any other pre-employment requirements per policy and law

Schedule

8 hour shift
Day shift
Monday to Friday

Application Question(s)

What is your wage expectation?

View full job page →

26d ago

Electrical Engineer

Catalytic Combustion Bloomer, WI

Bloomer, WI

26d ago

Full time Electrical Engineering CAD Design

Apply Now

Job Description

Join Catalytic Combustion in Bloomer, Wisconsin, onsite, as an Electrical Engineer responsible for evaluating electrical systems, conducting research, and providing technical support. You will collaborate with engineering teams to improve efficiency and production quality.

Your role on our team

Resolve technical problems, think analytically, and communicate professionally in a high pressure, time sensitive customer environment.
Apply extensive and diversified knowledge of principles and practices across broad areas of assignments.
Interact with CCC sales staff and/or customers to understand requirements and specifications to recommend application specific solutions.
Prepare, review, and provide project documentation in a timely manner for conformity and quality assurance.
Develop new techniques and/or improved processes, materials, or products.
Assist upper-level management and staff as a technical specialist.
Provide technical troubleshooting and support of installed products and serve as a resource for field service technicians and customer inquiries.

What we're looking for

Completion of 4 years of study in Electrical Engineering or other related discipline. A minimum of 5 years previous experience is desired.
Experience in engineering, relay logic, PLC controller operation and programming, AC power distribution, and current understanding of NEC/UL codes.
Familiarity with catalytic air pollution control technology and/or technology for the control of sound emissions from engines is a plus.
Advanced knowledge of computer applications such as SolidWorks.
Working knowledge of Microsoft Office suite is a plus.
Deal effectively and professionally with a wide variety of people and solutions, including maintaining professional relationships with customers who may be upset.
Meet deadlines.
Ability to travel up to 25%.
Must have a valid driver's license.

Technologies

SolidWorks
Microsoft Office

Location

Bloomer, WI (onsite)

View full job page →

28d ago

Senior Electrical Engineer (Controls)

Hawkins Inc Loves Park, IL

Loves Park, IL

28d ago

$100k - $145k/yr Full time Electrical Engineering Senior AutoCAD

Apply Now

Job Description

Join a collaborative engineering team onsite in Loves Park, IL, where your work directly shapes instruments and controls across new equipment, rental fleets, surplus assets, and investment recovery. This role offers a robust benefits package, opportunities for hands-on design leadership, and a clear path to broaden your expertise in electrical and control systems.

Benefits of joining the team

Medical, dental, and vision insurance
Life insurance plus short-term and long-term disability coverage
401(k) with company match
Employee Stock Purchase Program (ESPP)
Paid time off and paid holidays

Compensation and travel

Expected compensation: 100,000 to 145,000 USD per year, depending on experience, plus 10% bonus eligibility.

Travel: Approximately 30 to 35 percent of the time, with potential international trips of three or more days per month.

Responsibilities

Review customer specifications to ensure project requirements align with company capabilities.
Perform electrical design tasks including PLC programming, hardware selection, HMI development, wiring, and cabinet design.
Engineer projects by selecting electrical hardware and software, creating detailed plans, and supporting system integration.
Negotiate design changes with customers and present proposals, reports, and findings.
Collaborate with cross-functional teams and production staff to meet customer requirements and specifications.
Prepare sales estimates for new, rental, service, and surplus contracts; respond to inquiries about electrical controls and instrumentation.
Assist the Electrical Engineering Manager with training, workload planning, and assignments for junior designers.
Handle administrative tasks such as drafting reports, creating purchase requisitions, and approving material or service purchases.
Produce CAD drawings for wiring and cabinet layouts or provide details for CAD staff to create drawings.
Support rental startup services including installation, follow-up service calls, customer training, and system startup to meet contract requirements.
Prepare budgets, cost estimates, bids, and contracts for controls and instrumentation for new and existing customers.
Perform other duties as assigned.

Requirements

High school diploma required; a B.S. in Electrical Engineering is preferred.
At least two years of training or experience in automation systems, mechatronics, or electrical technology.
Experience in process industries is desired, with a preference for water or wastewater sectors.
Solid technical knowledge of company products and services and the ability to apply it to projects.
Strong teamwork and collaboration skills to achieve shared goals.
Excellent interpersonal abilities to build and maintain internal and external customer relationships.
Ability to contribute to business strategy and make recommendations within the scope of the role.
Foundational engineering knowledge across mathematics, physics, and practical applications in electrical and related processes.
Familiarity with power tools, meters, hand tools, computers, and related equipment used in electrical work.
Design capability to create precise plans, drawings, and models; proficiency with CAD tools is preferred.
Knowledge of circuit boards, processors, electronics, and programming of control systems.
Understanding of business principles, resource planning, leadership, production methods, and coordination of teams.
Customer service awareness, needs assessment, and quality standards focus.
Awareness of production and processing concepts, including materials, processes, quality control, and cost management.
Software and systems proficiency, including Microsoft Office, AutoCAD, controls programming software, and troubleshooting.
Familiarity with the technologies used for this role, such as Winman ERP, PLC programming (Allen-Bradley Studio 5000, FactoryTalk View Studio ME/SE, PlantPAx DCS), Siemens, Red Lion, Maple Systems, and a range of fieldbus protocols (Ethernet/IP, IO-Link, Profibus, Profinet, Modbus, HART, AS-i); CAD tools (AutoCAD, AutoCAD LT, Pro-E, SolidWorks); document tools (Adobe Acrobat Pro); and project software (Microsoft Project, Primavera).

Physical requirements

Regular communication and visual tasks are required; frequent walking and use of hands for manipulation; vision requirements include near and far vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. May lift and move up to 50 pounds.